400ex clutch prob.

[xNOILABOYx]

today i was tryin to bring a 300 up a hill w/ a tow strap and my clutches were gone, i can let out my lever all the way and the bike is like in neutral what part of the clutche goes bad like this?
the discs, friction,drive plate,or spring set

[afast400ex]

Its the friction material is gone. same thing happened to my friend

[TCracin440ex]

your best bet is to order the entire clutch kit, springs, fibers, and steels....

[400exdad]

TC's right, get a whole kit. The fibers usually go first, but you've probably overheated and warped the steels too. That will make for a clutch that won't disengage. On my 300, now MadMatt300's, I replaced the steels only because they were warped and the clutch was grabbing. Now, I'm wishing I had replaced all of it.

[TCracin440ex]

if your replacing the entire clutch the springs, steels, and fibers order a clutch cable too...another 16 bux for a fresh cable wont kill no 1

[xNOILABOYx]

are your steels usually supposed to have raised dots on them on recessed holes on them?