how fast

[mersingt]

how fast will i go with stock gearing and an hmf slip on and k and n power kit with lid removed and jetted..., and with a 14 tooth front sproket??

this is for a 300ex

[cdalejef]

Depends on how far you push the throttle.

I'd say you'll be close to fast and really fast...:cool:

[mersingt]

good grief all right what would be the top speed happy now??

[red2004 TRX450R]

it would be like around 80mph with the gearing!!

[mersingt]

yeah right....stock is 61 ive had alot of my firends clock me with cars and dirtbikes, the hmf is a bottem end pipe so it wouldnt give any top speed i dont think i would notice it with the power kit and i want to know how fast it would go seeing i have 22inch tires and am thinking of putting on a 14 tooth front sproket...

[Pappy]

gearing will affect the top speed not the friggon pipe. a sprocket change to a 14 tooth may give you 1 to 3 more mph.


jesus these top speed question get old

[Snow]

just do a speed trap

[mersingt]

i know that the pipe wont give me any more top speed it allmost hits the rev limiter as is......i was seeing if i could pull that 14 tooth.....

[UglyMotha™]

probably fast enough to go to the moon :o

[250EXpwns]

Why don't you try it and find out? Nobody will know until you have it clocked yourself because everyone's bike/quad is different. Sometimes you get a average built one, and then sometimes when you're lucky you might buy one of those that the manufacturer did an awesome job on. Like mine for example: Me and one of my riding buddy's have the same exact setup and jetting on our 400exs but for some reason mine outruns his on top end by 3 mph! So there ya go... .02