PDA

View Full Version : 300ex chain adjuster



mech_head6
08-03-2004, 08:00 AM
Where can i get the chain adjuster tool for my 300ex, my quad didnt have one when i got it.:confused:

TheFontMaster
08-03-2004, 08:13 AM
Just use a flat head screw driver.

mech_head6
08-03-2004, 08:32 AM
What bout when you have to rotate the part next to the hub, i have been using a channel locks, but i would rather use the right tool.

TheFontMaster
08-03-2004, 03:00 PM
What next to the hub has to be rotated. Just loosen the 2 bolts on the back of the swing arm, then put a flathead screw driver in the little thing to roatate the carrier. And pull it towards you to tighten it, Push in to loosen.

mech_head6
08-05-2004, 07:42 AM
Thanks guys i thought that there was a tool that slid into those grooves, to adjust it, but since my toolbox was empty i just didnt have one.

mersingt
08-05-2004, 07:55 AM
it was just a allen wrench.....:o

buddy what not
08-06-2004, 08:35 AM
i always use the allen wrench i used to loosen the to axel carrier bolt with it fits right in