parting out 300

[JDiablo]

i don't know if im going to part this out yet,if i get enough requests then i will,let me know on it
it has....
elka front dual rates,comp adj,SSD(remote rezzy)
elka rear dual rate,comd adj,SSD(remote rezzy)
bugard 2+1 a-arms(nickle plated)
burgard standard length swinger(grey looking pc'd job,looks nice)
burgard bearing carrier
RPM axle(1+2)
lonestar rear wheel billet hubs
lonestar anti-fade brake hubs and lock nut
denton adjustable steering stabalizer
holeshots all around
yoshi slip on
uni air filter
edelbrock carb
new stator
ASV brake/clutch levers
oneil handlebars
duncan racing front bumper
DG nerfs
DG grab
ebc brake pads all around
streamline front and rear sst brakelines(black)
hardkor front hubs(red)
renthal chain and sprockets
moose shifter
and i know im forgetting alot
powdercoated trans red frame,motor mounts,throttle cover,top handlebar mounts,battery boxowdercoated gloss black,DG nerf bars mounts(the ones that go to the frame rails in front of the engine,and the ones that mount to the side frame with the footpegs

SOON TO COME...roll design footpegs,can include roll design steering stem,and jaggs oil cooler....let me know if anyone is interested in this

[300exdragracer]

i am intrested in a few things like the rear shock, axle, steering stabilizer, carb, n bumper

[TheFontMaster]

I'm interested in the rear caliper, brake lines, resivoir, and brake pedal and assembly, if the price is reosonable.

[JDiablo]

most of these parts are brandy spanking new.....umm prolly no more then 3-4 months..and the carb i didnt even receive yet,so if you want all of that say....1250 shipped?>

[JDiablo]

Originally posted by TheFontMaster
I'm interested in the rear caliper, brake lines, resivoir, and brake pedal and assembly, if the price is reosonable.

this the one screw on the master cylinder i had to drill out cause it stripped,but if you wanted all of that,umm....80 shipped?it is a stainless steel blake streamline to...+2 i think

[JDiablo]

sorry if the prices are a lil crude,first time doing this..seems like im getting good offers,also have raptor rear shock...ummm and some other lil stuff just ask....first come first serve too;)

[300exdragracer]

what about each part individual priced

[JDiablo]

well for the parts that you want i am intrested in a few things like the rear shock, axle, steering stabilizer, carb, n bumper


rear shock=550
axle=290
stabilizer=90
carb=350(haven't even installed yet)
bumper=75-85..one bolt is missing,doens't hurt anything though

front shocks=575
arms=290
swinger=375
rear hubs=75
antifade brake hub and locknut=90
chain(2)20
rear sprocket=10
front sprockt=5
DG nerfs(powdercoated gloss black parts....will show pic in min of the parts)75
DG grab=25
yoshi slip on=250
anything else just ask....

[Snow]

how much for the axle, a-arms, and slip on pipe?

[Snow]

can give you the stock axle stock a-arms and super trap full pipe if i can get what i wanted above but i will need the headpipe too not just the slip on i have money too.

[JDiablo]

nah,need the moneys,want to try and get a new quad soon,so for the axle,arms and pipe/with headpipe shipped...uhh 825 shipped i would guess

[Snow]

ok so 825 shipped without my stock parts and supertapp pipe. also can i get some pics

[ghak99]

I am very interested in the arms, all I need to see is pics. If you have any pics of the arms send to garyalbertson@hotmail.com Is that price firm or can we deal a little?
Let me know asap!

[JDiablo]

ok guys ok ghak if nacsracer doesn't want the arms there yours...and pix...NP

[JDiablo]

all of this stuff is almost brand spanking new....most ride on it is about 7,haven't been able to ride in about a month so yea get it........frame pc'd trans red ill let go for 450-500 shipped also

[Snow]

ok ghak the a-arms are yours all i want now is the yoshi pipe and header. how low can you go on that shipped?

[JDiablo]

give me 260 shipped i guess....sounds good,all of those prices didn't include shipping...so 10 bones for a headpipe and shipping aint to bad....

[Snow]

ok and hw does it sound. is it much loader than a stock and is it legal? the super trap i have isnt legal and i want to get something that is but still have some performance. do you know the decibals?

[JDiablo]

ehh idk,it is sorta loud.....i would have to say maybe 96-98 dbs?but you can quiet it down with the tec kit

[mersingt]

how much for the front shocks def want the front shocks have you sold the axle yet??

[JDiablo]

nope,for the front shocks and axle toghter
ehh say 865 shipped?

[mersingt]

well or how about just front shocks??

[JDiablo]

590 shipped:)

[mersingt]

ill talk to my dad he will probably say not now so you can go ahead and sell them if you can thanks for your time..its sad to see you part out the 300ex...you coulda gone with a big bore and such....

[Yamaha350x]

Front bumper? What kind? How much?

[honda_ridda]

if ghak doesn't want the a-arms then i am interested.

[JDiablo]

Originally posted by mersingt
ill talk to my dad he will probably say not now so you can go ahead and sell them if you can thanks for your time..its sad to see you part out the 300ex...you coulda gone with a big bore and such....

im not totally 100% sure i am parting it out though,but i bigger quad has alot more opprutinity(sp) then the 300,and a big bore...ahh forget that and bumper....ummm 90

[trict_out]

im interested in the aarms and front elkas

[JDiablo]

900 shipped for those two

[JDiablo]

alright here is the list of all stuff basically....
burgard 2+1 arms-290
front elka shocks-575
rear elka shock-550
burgard swinger-375
RPM axle-300
edelbrock carb-350
duncan racing bumper-80
Lonestar rear wheel billet hubs-80
lonestar antifade brake hub and locknut-90
yoshi slip on-250..260w/ headpipe
burgard bearing carrier-90
DG nerfs with pc'd mounts-75
DG grab-20
MOTOR-825 or 850 with stock carb
wiring stuff-100
airbox w/ lid-15
airboot-5
UNI airfilter-5
stem 35 or 45 with handlebar mounts that are pc'd(only top mounts)
oneil bars-15
asv brake lever and clutch-45
streamline front brake lines-35
front calipers 30 each
rotors-15 a piece
rear brake setup,caliper,brakeline,master cylinder,brake pedal-115
gastank-25
petcock-10
spindels-30
front hardkor hubs in red 325
moose shifter 10
brand new O.E.M pivot bolt (installed,never rode on yet) 10
chains..10 a piece renthal and DID
sprockets 5 for the front-10 for the rear
Frame Pc'd trans red last winter,straight,never cracked,no welds perfect condition-500(will work out price)
battery box pc'd trans red-25
motor mounts pc'd trans red 10
throttle cover with cable-25

i no im prolly forgetting some things,let me know on this,can get more pix upon request

[brian-250]

HEY!, i told you i wanted that clutch/perch and block off.;)

[JDiablo]

BUMP....c'mon guys everything needs to go...need a new ride ASAP!

[JDiablo]

TTT c'mon guys i need another quad:macho

[JDiablo]

bump....plastics are for sale to and seat forgot to add....plastics are front 75 same for the rear or 140 for both,seat is 50

[400ex28]

how much for the chain that will fit on the 400ex

[roostin_dale]

Are you parting it out for sure now?

How much for the stabilizer? I dont see a price...

[Snow]

il give you 200 for the a-arms

[300EXrider02]

Originally posted by 300exdragracer
what about each part individual priced

Willing to go down on the axle price if I give you my perfect condition stock axle? I will give you ike 170$ plus my axle...

[JDiablo]

^^ no don't want a stock axle,i need to sell it,and no 200 is to low for the arms,and roostin im 95% postotive im parting it out....and the stabilizer ill let go for 90+ shipping?

[JDiablo]

TTT:o c'mon guys....as of right now,front shocks,stabilizer,both sprokets,asv levers,and lonestar PB blockoff are sold:)

[Cody_300ex]

The Denton damper, rear rotor, and pads are sold!

[dbsbl1]

You got an ignition switch and a key?

[JDiablo]

yes.....i have everything...by that you mean the key and the ignition right?don't want to get anyone "order" messed up

[QuAdEr 317]

willing to go 80 shipped for the bumper?

[QuAdEr 317]

by the way im in new jersey so shipping is prolly cheap im in maple shade

[dbsbl1]

Originally posted by 300exrida
yes.....i have everything...by that you mean the key and the ignition right?don't want to get anyone "order" messed up

Yep, I meant the key, the cylinder you put the key into, and the two wires that come out of the bottom of it.

How much you want for it?

[JDiablo]

Originally posted by dbsbl1
Yep, I meant the key, the cylinder you put the key into, and the two wires that come out of the bottom of it.

How much you want for it?

it is a lil messed up,i had to tape the cylinder,so 15 shipped should do....how many keys do you need?

[JDiablo]

alright,im goign to my lakehouse for the weekend in a bit,so just send me a PM with what you want....as of now the
elka fronts
raptor rear
asv levers
both sprockets
lonestar pb blockoff
the whole rear brake setup
rear rotor are sold

[Cody_300ex]

Originally posted by 300exrida
alright,im goign to my lakehouse for the weekend in a bit,so just send me a PM with what you want....as of now the
elka fronts
raptor rear
asv levers
both sprockets
lonestar pb blockoff
the whole rear brake setup
rear rotor are sold

add my stabilzer to that list dumbazz

[QuAdEr 317]

about that bumper? 80 shipped im in south jersey next to cherry hill

[mersingt]

what size are your rear tires??

[QuAdEr 317]

Originally posted by 300exrida
alright,im goign to my lakehouse for the weekend in a bit,so just send me a PM with what you want....as of now the
elka fronts
raptor rear
asv levers
both sprockets
lonestar pb blockoff
the whole rear brake setup
rear rotor are sold

add the bumper also please i def want it

[dbsbl1]

Originally posted by 300exrida
it is a lil messed up,i had to tape the cylinder,so 15 shipped should do....how many keys do you need?

You got a pic? dbsbl1@hotmail.com if you do. I had to tape up the one that I have...that's why I'm wanting another one.

[rollie]

Originally posted by 300exrida
alright,im goign to my lakehouse for the weekend in a bit,so just send me a PM with what you want....as of now the
elka fronts
raptor rear
asv levers
both sprockets
lonestar pb blockoff
the whole rear brake setup
rear rotor are sold

both those shocks are mine ...lol yes im getting new suspension:D :D :D i should be able to buy them by next week
:)

[JDiablo]

alright cool,im back and got my quad here,i guess 80 shipped for the bumper sounds rad,anything else?ill make a nice new fresh thread so don't reply in this one

[Snow]

250 shipped for a-arms?

[Snow]

250 shipped for a-arms?

[JDiablo]

ill do 270 shipped,and for the person that asked bought my tires,there huge at 22 inches,lol

[Snow]

ok they are chamber adjustab;e right, also do they come with tierods and bushings. can i get a pic of it from the front so i can see both of them. thanks a lot.

[JDiablo]

yea come with everything,hold up a lil bit bro imma working on taking all the parts off now,so in a lil bit ill have them posted,before they are shipped everything gets a nice clean washing and polishing:macho

[Snow]

very very cool

[JDiablo]

alright got them pix,wow i think imma miss this thing though....making a new thread after this so peace:D

[JDiablo]

couple more:o

[JDiablo]

one more,i got more if you want though

[JDiablo]

o well frig it,bump....so nacs u def want the arms then

[JDiablo]

alright here is the list of all stuff basically....
burgard 2+1 arms-SOLD
front elka shocks-SOLD
rear elka shock-550
burgard swinger-375
RPM axle-300
edelbrock carb-350
duncan racing bumper-80
Lonestar rear wheel billet hubs-80
lonestar antifade brake hub and locknut-90
yoshi slip on-250..260w/ headpipe
burgard bearing carrier-SOLD
DG nerfs with pc'd mounts-75
DG grab-20
MOTOR-825 or 850 with stock carb
wiring stuff-100
airbox w/ lid-15
airboot-5
UNI airfilter-5
stem 35 or 45 with handlebar mounts that are pc'd(only top mounts)
oneil bars-15
asv brake lever and clutch-45
streamline front brake lines-35
front calipers 30 each
rotors-15 a piece ONE SOLD
rear brake setup,caliper,brakeline,master cylinder,brake pedal-115
gastank-25
petcock-10
spindels-30
front hardkor hubs in red 325
moose shifter 10
brand new O.E.M pivot bolt (installed,never rode on yet) 10
chains..10 a piece renthal and DID ONE SOLD
sprockets 5 for the front-10 for the rear
Frame Pc'd trans red last winter,straight,never cracked,no welds perfect condition-500(will work out price)
battery box pc'd trans red-25
motor mounts pc'd trans red 10
throttle cover with cable-25

[JDiablo]

some pix of the asv levers,just installed,don't have a ride on them yet

[JDiablo]

another

[JDiablo]

c'mon guys i got some narly hardkor hubs that will fit a 400ex/300ex just got these in today....brandy new opened just to take pix

[JDiablo]

.

[JDiablo]

one more for the nite guys and im done...i know someone wants these parts so why don't you help a kid out and give him some money for his parts so he can buy a new quad:D lol j/k like i said all the parts are basically new thouhg

[JDiablo]

bump c'mon guys