fasterz
08-02-2004, 03:32 PM
well as the title says, i have a problem with my rear brake. the set up is stock besides a stainless line. for some reason my pedel was like really high so i adjusted it down wit the adjustment bolts on the pedal. after i adjusted it you had to push it really far for the brakes to engage so i just put it back how it was. at the races i noticed it was dragging alot and you had to press the pedal really far for it to stop. it doesnt need to be bleed because it was perfect and i tried bleeding it but the problem was the same. its like the part that the oil pushes is stuck or something because when u move the lever the first couple inches it doesnt do any thing and theirs no pressure at all and then once u push it to a point they just lock up how they used to but it just has all this open free play. could my master cylinder be bad? or is the caliper shot? help me out please so im ready for my next race. its kind of hard to explain whats going on with it.