PRM swing arm skid and frame skid plate for 400EX

[SGA]

Good condition, a few scratches, otherwise ok.
Frame skid plate comes with all hardware. I would like to get $50 apiece, that includes shipping.

[SGA]

Bump

[Locknload82]

I,am intrested in the chassis skid plate, I'll send you a pm

[Silverfox@C&DRacing]

what thickness is the full chassis skid?

[SGA]

Originally posted by Silverfox@C&DRacing
what thickness is the full chassis skid?
The frame skid is .125 (1/8'')
The swingarm skid is .250 (1/4'')
They are both PRM and built like a tank. I'll put up pics tonight.:)

[EX Stud]

let's see some pics......

[SGA]

The digital camera went belly up, so this is the only pic I have right now.
This is a pic from when I took them off awhile back. I washed and cleaned them up tonight and put the frame brackets (Hardware) on the frame skid.
The swingarm skid does not come with hardware, you are supposed to use the 4 bolts that hold your original swingarm skid on. The original is thin stamped metal, the PRM is 1/4" inch thick.

I highly recommend going to the hardware store and getting four new metric bolts that are 1/4" longer than the original bolts or the threads in the swing arm will strip when you tighten the skid down. One of mine did. The new longer bolts did the trick.

[spinout]

do they come mounting hardware?if i will give you 100.00 shipped for both.email me at rcs110@dandy.net if interested in offer.thank you

[SGA]

Originally posted by spinout
do they come mounting hardware?if i will give you 100.00 shipped for both.email me at rcs110@dandy.net if interested in offer.thank you
Email sent.

[EXrider65]

do u still have the plates

[SGA]

Originally posted by EXrider65
do u still have the plates
Sure do

[Craig02]

will you take $40 for the swingarm skid?

[SGA]

Originally posted by Craig02
will you take $40 for the swingarm skid?
I'll do 40 + 5 UPS shipping=45

[Craig02]

Ok, what is your paypal address, you can email me at
shorty99b@charter.net

[SGA]

Originally posted by Craig02
Ok, what is your paypal address, you can email me at
shorty99b@charter.net
You have mail:)