Log in

View Full Version : MAY part out Arens CRF450... TONS of PARTS.. 400ex 250r LOOK



416exmx
08-01-2004, 12:18 PM
OK here is the deal. if this thing dont sell or trade by the end of the week i am going to part it out... i am listing the stuff now so by time i am ready to part out i will already have some buyers hopefully.... THE FRAME AND MOTOR MUST SELL FIRST!!!!!! after i have buyers for those i will sell everything else...

EVERYTHING on this bike is PERFECT. CANT tell a difference from NEW.. i am not going to take pictures of each little item but i am telling you everything is basicaly NEW... look at this eBay link for SPECIFIC details on each item>>> http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2486120729

Once again, if the whole quad dont sell by the end of the week THEN i will start parting it out... so come on, i need frame and motor buyers!!!

Everything is 400ex.. suspension and stuff will fit R and others


04 Arens CRF frame and 400ex subframe.....$1300

02 CRF motor, carb, wiring. NEW top-end, ALL HINSON products...$2500

Elka quad rate LT dual adjust fronts....$850

Elka dual rate dual adjust rear..... $600

Herrmann +3 LT a-arms.....$650

Houser +1 1/4 swingarm.....$350

NEW JB chrome +1 stem & Walsh mounts.....$275

LSR axle +4 NICE....$250

Baldwin antifade....$100

Billett carrier....$100

Yoshi CRF/EX full ceramic exhaust....$300

Fullbore F/R graphics/new seat......$450

Baldwin front hubs.....$200

Stock rear hubs.....$50

250r PWR radiator, Walsh shrouds....$250

Billet center beads front w/ 20x6x10 mx’s......$300

Billet center beads rear w/ 18x10x8 mxr4's......$300

Tag bars 1 1/8....$50

AC pro-pegs (new style).....$15

front calipers/master cylinder, rear caliper/master cylinder.....$200

front rotors (2).... $50

rear rotor...... $40

Front wave rotors (2).....$75

Rear wave rotor .......$50

front knuckles.....$75

WB bumper....$50

Tank w/ petcok..... $40

Billet gas cap.......$25

Moose billet throttle...$75

Stock throttle housing....$40

rear linkages....$40

F/R braided brakelines.....$75

Hinson rear brake pedal....$50

Brakeline holders....$60

Sidewinder chain/sprocket.....$70

Pivot bolts......$40

CRF450 Magura hydro clutch......$120

PRICES + SHIPPING.....

farmbig_01@otbnet.com

muddin300
08-01-2004, 12:23 PM
ill trade you my 2000 300ex and my 2003 raptor i have a post give me your email and ill send you pics

drthrottle
08-01-2004, 01:56 PM
I need the front rotors. I'd like the wave's but I'll settle for the stockers if you're sure they'll fit my 450r. I'm going to ckeck to see if I can use the Elkas on my quad too.

C41Xracer
08-02-2004, 11:37 AM
are the pro pegs for a 400 ex style set up or a real pro peg frame?

drthrottle
08-02-2004, 03:58 PM
Hey 416exmx. I'm in on the Elkas for 850 too. And I'll check to see if I can use the Baldwin antifade on my 450r. Hope you get buyers on the other parts.

buddha440ex
08-03-2004, 02:57 AM
$15 for the pro pegs...i'll take em!!

soilworker
08-03-2004, 05:25 AM
What are the front shocks valved for? How do you think those shocks would work on a set of +2 arms for 450R? Also, what's needed to mount them to the R? Any new bushings or do they bolt right on?

JRDCRF450
08-03-2004, 06:55 PM
I emailed you on the exhaust and hubs. Can you either email me back at Thor58L@aol.com or call the number I gave you. I am very interested.

sticksracing
08-09-2004, 11:03 PM
how much for the motor carb and electronics and exasts? and sub frame?

Narly R
08-09-2004, 11:30 PM
I will take the preo pegs for $30!!!!!!!! I will double your price! I have the money, so if you want to sell them for $30, I will take them!!! PM me or try to put sumthin on here, my PM's are messed up. Thanks.

Narly R
08-09-2004, 11:32 PM
Well, it looks like you ment to put $150, but if not, then $30, and they're sold.;)

Narly R
08-09-2004, 11:34 PM
What would you be willing to sell the whole bike for?

YTZ250#1
08-10-2004, 09:38 PM
Is the antifade for an ex rotor or an R rotor?

416exmx
08-10-2004, 10:19 PM
i am in the process of building a new shop and have been SUPER busy with that. they were shooting on having it done this past week but ran into problems and it is going to be another week at least. i didnt expect this and was wanting to wait and part it out as soon as the new shop was done. the quad is in storage at our business with a cover over it. anyway, sorry i have not gotten back to you guys sooner but the way it stands is $9500 for whole bike or maybe next week my shop will be done and i will start tearing it down...

$150 on pro-pegs..

antifade is EX...

$9500 buys the whole quad...

still no buyers on frame or motor..

sticksracing
08-10-2004, 10:55 PM
i said i would take the motor exast carb eletronics and sub frame air boot and air box

trick450r
08-11-2004, 08:53 AM
if that magura hydro clutch will fit a 450r then give me a shipping price to 06470!, also if those front and rear brake lines fit a 450r give me a combo price for both those and the hydro clutch!

416exmx
08-12-2004, 11:05 AM
Originally posted by sticksracing
i said i would take the motor exast carb eletronics and sub frame air boot and air box

$2830+shipping let me know...

if he buys this i will start parting it out as soon as i get payment..

unstopable1
08-12-2004, 11:19 AM
How much would you take just for the frame no sub frame? What is the frame made out of and how much does it weigh? Could you get me some close up picks of it just to get a better look at it.

ralph2
08-12-2004, 12:58 PM
i might be interested in the frame sub frame, motor,,,,, how much we lookin at for that:rolleyes:

BigAl
08-14-2004, 06:52 PM
What bolt pattern are the wheels???????????

drthrottle
08-17-2004, 11:10 PM
let us know about the stuff. still would like those rotors. later