How much toe in on 400ex?

[z400ACDC]

My nephew bought a used 400ex with Houser+2 arms. It has a bent tie-rod and I need to know how much toe in to put in it.

[cdalejef]

1/4"

[z400ACDC]

Thanks Jeff! I got ya on the christmas card list now:)

[cdalejef]

;)

1/4"!!!!!!!!!!!!!!!! can I be on you christmass card list too?

[Spikers400]

I adjusted my tierods to the specs in the manual. It said have a certain length from the tierod end to the first thread. Does this mean i have the 1/4 inch toe in. Or does this mean i have 0 toe. Thanks

[cdalejef]

I wouldn't go by that, just measure at the front and rear of the tires.

[maxamillion]

in the clymers it says the back of the front tire should be about .5" to .6" wider than the front. but 1/4 would prob be fine too.