about taking out the baffle

[450rboy]

if i take out the baffle will i have to rejet it

[450Ryder]

no.

Originally posted by 450Ryder
no. ;)

[dodgeram]

will you gain any performance??? How about it you take out the baffle and add a K&N?

Originally posted by dodgeram
will you gain any performance??? How about it you take out the baffle and add a K&N? as u may have hard K&n's arent very good let debris into your engine but if you did add a K&N & take the baffle out you should rejet..i think you may still make it without...you'd have to try it to find out...your elevation plays a factor too

[450rboy]

well i live in pennsylvania. and what do you think i will have to rejet it to. what is the stock jet in it anyway

[450rboy]

what would you do if you put a k&n on and with a outerwear

[AZDESRTRACR]

Originally posted by Jumbo747
as u may have hard K&n's arent very good let debris into your engine but if you did add a K&N & take the baffle out you should rejet..i think you may still make it without...you'd have to try it to find out...your elevation plays a factor too Never had a problem with mine and its been pretty dirty before :D

[450rboy]

but do you think i might have to rejet it

[MY450R]

if u run without a lid then rejet to about 170-180
otherwise no

[ZRider400]

i removed airbox lid, removed baffle, and it has a stock air filter.... right now im running a 170 main jet. its a tad rich (Plug is dark) so when i get a aftermarket filter (uni) it should be better.

[dodgeram]

did you have to move the needle or pilot any, or just put the 170 main in?

[REDARMYRACER]

just but an hrc kit. it's moe money but everything u need is in there, and the bike will still run well.

otherwise jus jump a main or two
although i would not know for sure.

taking out the baffel and removing the airbox lid will lean out the bike a little.

you may need to rejet, but only the main.