hot start lever

[trost66]

How are you suppose to mount your hot start if you change bars and want to get rid of the kill switch and headlight switch.

[416rider]

Find a new clutch lever that has the hot start on it I have seen them for motorcycles but can't remember the company.

[trost66]

that is really worth it. I just bought a pep ez pull clutch lever

[416rider]

you may have...

http://www.worksconnection.com/store/produ...ml?prod_id=1755

or

http://www.worksconnection.com/store/produ...tml?prod_id=296

you need...

http://www.worksconnection.com/store/produ...tml?prod_id=302
or

http://www.worksconnection.com/store/produ...tml?prod_id=303

none of the links work

[416rider]

http://www.trx450r.org/forum/index.php?showtopic=1030

[FatBoy Racing]

I got the works pro perch just today with the hotstart. Sure looks purdy, but the hs lever works a little wierd . . . maybe just some cable lube needed there. I'll post something about it when I get a chance to run it . . . still fingering out what I'm gonna do about the light/kill box. I'm considering grinding off the area where the hotstart used to be, but havent spent any time messing with it yet.

[FatBoy Racing]

well, talkin about it gave me the umption to give a whack at it. A little while into the swap, I decided this was way to nice a piece of hardware for me to butcher. The threaded knob on the adjuster is made for a smaller diameter cable than what comes stock, so I would have had to get another, or drill out what I had. Also, the hot start lever was just plain floppy. The stock setup has a little squarish clamp that holds part of the HS cable in place, and without it the lever sort of bounces around. In the end, I'm glad I didn't grind off the old assy as that's what I'll use for a while. In my case, I want to preserve the kill and light switches, so I may as well just use the stock hotstart as well. I could have probably modified it to work, but I just didnt want to tear up such a nice piece of hardware, especially at $125.

[trost66]

thanks for your guys help

[bigz-71]

if you put the works connection lever with the hot start on the lever you will have to buy another hot start cable. the stock one does not work. i got the work connection on my bike. i got the cable from mark baldwin. he was very helpful. i paid like $25 dollars plus shipping for the cable. i hope this helps.