PDA

View Full Version : case splitting ?!



JHF219
07-21-2004, 03:00 PM
Hey guys whats the trick to seperating cases? i have all the bolts out but it doesnt seem to want to split can someone help !? please ?!

wilkin250r
07-21-2004, 03:02 PM
Jaws of Life...

JHF219
07-21-2004, 03:06 PM
Originally posted by wilkin250r
Jaws of Life...

translate that to COMMON tools that i have or can rent i dont think the local FD is going to help me out :p

gncc571
07-21-2004, 06:28 PM
make sure you have all the bolts out and hit the end of the crank with a rubber mallet,thats how i always do it

ZRider400
07-21-2004, 08:18 PM
have someone hold the whole bottom end up by the right case and while its suspended in the air tap on the crank with a rubber mallot. the weight of the other half should pull it appart easier when tapping on the crank.

900rracer
07-22-2004, 07:58 PM
Like the other guys said, use a rubber mallet and tap while someone holds the case half. Also, make sure your counter balance is lined up in the opening or that will hold you back from separating.

Teufel
08-08-2004, 10:22 AM
I use a motion pro case splitter , if you work on many motors it's well worth the money