PDA

View Full Version : CDI trouble



X2guy
07-21-2004, 01:29 PM
Does anyone know where I can get info on how to test my CDI from my 86 250R?
Thanks

Rrider07
07-21-2004, 08:00 PM
what does the bike do that could be wrong with it?

X2guy
07-22-2004, 10:30 AM
It sparks only about one in ten kicks. The guy I got it from put a new coil and stator in it and gave up. I checked all the wiring. I'm thinking the only thing left would be the CDI.

wilkin250r
07-22-2004, 04:53 PM
The manual gives you diagnostics for the stator, coil, basically for your entire ignition system BUT the CDI.

According to the manual, the only way to check the CDI is by process of elimination. You check EVERYTHING else. If it all checks out good, and you still have a problem, then your CDI must be bad.

Westro
07-23-2004, 06:34 AM
I had a simular issue. But I did have an extra CDI around. The 'new' CDI didn't help. Ended up being a wire grounding issue.

Find someone in your local district and ask if you can swap CDI's quick.

Diddo wilkin250r said. The manual eliminates everything then replace the CDI.

X2guy
07-23-2004, 09:02 AM
I think your righ...I have to take a closer look at the wiring before I buy a new CDI. It's a little messed up. I have no idea what the guy was doing before I got it from him.
Thanks