PDA

View Full Version : i want more ponys



badass250r
07-21-2004, 07:43 AM
i have an 88 250r all i have is a procurcit exhust and a k&n i was think port and polish 4 my next mods?

Pappy
07-21-2004, 07:50 AM
just buy a esr 310 kit and be done with it

twisted threads
07-21-2004, 01:01 PM
Yep call up ESR and they will hook you right up.:D :macho

wilkin250r
07-21-2004, 03:12 PM
Don't forget head modification or an aftermarket head to bump the compression.

A good port job will run somewhere around $300-$400, an aftermarket head runs about $200, figure around another $100 for a piston and gaskets, and you're looking at about $700 for somewhere around 45HP on the stock bore or first overbore. You can probably keep up with, maybe just barely beat a piped banshee.

For another couple hundred, you can get the 310 kit from ESR and be pushing somewhere around 50+ horsepower, and leave a piped banshee in the dust.

Rrider07
07-21-2004, 08:02 PM
LRD 330s are good too for more horsies

powerslider
07-24-2004, 03:18 PM
If you want to stay with the stock jug get a hold of Sandtrix (Jeremy Bennight) very reasonable prices and they run....

Chef
11-28-2004, 12:17 AM
If its still in the 300cc range your all panzies. :blah: