Parting Out, my sick MX 400ex -fully aftermarket

[muff]

I am parting out my practically all aftermarket 2001 426ex to get the money to buy a yfz. Add shipping to all parts, powdercoat was all new this spring, and a ton of other parts were new as well. I've had maybe a dozen rides and not even 3 races on the quad this year. Will be parting it out next sunday, I'm listing it now so parts can go as quick as possible after sunday. I take paypal or money orders. Feel free to call me at 860-917-9860

-Burgard guesseted frame, powdercoated charcoal metallic by pappy. PC on the bottom of the frame is scraped off, but other than that its in excellent condition. $450

-Roll Design +3 long travel a-arms. Chrome uppers and brand new powdercoated lowers (buyers choice of color). Walsh tie rods and ends (totally trick). Lower ball joints were replaced in april, upper ball joints need to get replaced soon. $950

-Curtis Sparks X6 stainless steel exhaust. Looks, runs, and sounds awesome, has a small dent from the caliper in the muffler, $350

-RPM dominator axle. Fully adjustable from +1+2+4 I believe. purchased late spring $375

-Kenda klaw front tires on stock rims, great condition, one has a slight leak (looses maybe a lb a day), tires have good tread $150

-Rear brake system. Caliper and pedal are powdercoated translucent blue, streamline stainless rear brake line, comes with master cylinder and resivor, and Cascade polished parking brake blockoff $150

-Front brake system. Master cylinder and lever, stainless steel +3 brake lines, powdercoated blue calipers. $175

-Sidewinder sprockets. Titanium 36 tooth rear sprocket. 15 tooth steel front. Great shape, no teeth are bent/busted, by far the toughest setup I have seen. $75

-CFM oversized oil tank, holds an extra quart. $100

-rear linkage. pivot works bearings were installed this spring, in great shape. $60

-spindles, purchased brand new this spring, perfect condition $80

-rear hubs, powdercoated translucent blue this spring. splines arent damaged $75

-gas tank and petcock, clean and no leaks. $50

-Complete electrical. Battery, coil, etc. everything! stock headlight switches have been removed, now has a kx kill switch start button, and pro design tether switch that is wired in. $125

-gas tank plastic (white piece found under the gas tank) $15

-stock airbox and UNI airfilter $40

Sold Items:
-RPM +1 1/4" swingarm. Powdercoated translucent blue, pivot bearings are in good condition, has skid plate mounts, and comes with a blue UPP banshee chain slide. $375 (sold)

-Gibson steering damper. Purchased early summer with only a few rides on it. Works great, I'll never run without one. $100 (sold)

-Maier race cut plastic. Factory effects yellow graphics kit. Has small crease marks here and there, but looks awesome overall. Tag T2 bent handlebars $250 (sold)

-thumb throttle assembly (sold)

-AC front bumper, new this spring but has been bent. $30 (sold)

-Walsh antivibe handlebar clamp, comes with mounts for the key switch and pro design kill switch. $75 (sold)

-GT Thunder rev box, allows the quad to gain 1000 rpm, and starts up easily with no hassle $50 (sold)

-426cc ex motor. Bored out to a 426, weisco 11:1 compression piston, FDO heavy duty studs, Hot Cam stage 2, new barnett clutch plates and springs. runs great and is in excellent condition, does not smoke, piston and studs were new this spring. $1000 (sold)

-Baldwin front hubs. Polished with anodized blue caps. These hubs each have 3 bearings and roll great, new this spring. $275 (sold)

-Hiper Tech 8" rear rims with integrated hubs. MXR 18" tires mounted on them with good tread. Tires all hold air and are quite new. $400 (sold)

-Lonestar antivibe chrome steering stem. +1 slightly bent back and over $125 (sold)

-PEP long travel front shocks. Big ressie 8-click compression adjustment. Setup for a z400, but have worked great on my 400ex, very plush shocks. $800 (sold)

-Galfer wave rotors, front, straight, approx a month old with little use $180 (sold)

-Galfer wave rotor. Excellent condition, straight, purchased late spring. $90 (sold)

-Lonestar antifade locknut. works great $100 (sold)

-Keihin FCR41mm carb. brand new this spring, runs great and has good power gains, comes with throttle cable, gas line with fuel filter, and vent tubes. $375 (sold)

-Axis dual rate rear shock, setup for a 190# rider on a +1 1/4" swingarm, works great, compression adjustable. $500 (sold)

-Burgard polished bearing carrier, bearings roll freely. $75 (sold)

-AC new style propegs. Comes with all mounts, these things are tough! $200 (sold)



http://www.imagestation.com/picture/sraid130/p430128f41c202b863e93d4652d0b82e4/f7c21602.jpg
http://www.imagestation.com/picture/sraid130/p3956177d2622e0e0cd81288eb508b715/f7c21607.jpg
http://www.imagestation.com/picture/sraid130/pf74059c86d3dd10d30fd192daa6f50e6/f7c2160b.jpg
http://www.imagestation.com/picture/sraid130/p73a01f7afc504c36582d26c13966fa5b/f7c2160d.jpg
http://www.imagestation.com/picture/sraid130/pb08ace5aa481f5c2a130a3753e90022c/f7c21610.jpg
http://www.imagestation.com/picture/sraid130/pdaafd2a426092d5ae01aeb8ef31afb63/f7c21612.jpg
http://www.imagestation.com/picture/sraid130/pb05e90c03b6a9c4a2118924f4abb43ab/f7c21618.jpg
http://www.imagestation.com/picture/sraid130/pbe3e5ba79f0cc7bb6465afbfecfdc52d/f7c2161f.jpg
http://www.imagestation.com/picture/sraid130/p1276c80ea7f4212dfea35d1262070a72/f7c21621.jpg

these pictures were just all taken today (wednesday)

[Chef]

Could you send me a pic of the dent in the exhaust? If not, just let me know if its pretty minor, or just the average dent from the caliper, or what...can you even see it from teh side?

[Blasta400ex]

interested in the handelbars...how much??


and maybe the pastics...

[muff]

I will get pics tomorrow. the dent isnt more than a 1/2"

[muff]

Originally posted by Blasta400ex
interested in the handelbars...how much??


and maybe the pastics...

the handlebars are bent down a little bit on one side, if you bought the plastic I'd throw them in for $20

[Blasta400ex]

and how muchn would it be to ge the blue plstics without the seat b/c i have the sane graphics and seat cover

[muff]

Originally posted by Blasta400ex
and how muchn would it be to ge the blue plstics without the seat b/c i have the sane graphics and seat cover

$200

[brian-250]

shoot me a price on the clutch lever/perch & the block off plate.

[muff]

$10 for the clutch perch and lever.

the block off is staying on the caliper

[brian-250]

Originally posted by muff
$10 for the clutch perch and lever.

the block off is staying on the caliper


iight, what kind of start button is that?:confused:

[muff]

Originally posted by brian-250
iight, what kind of start button is that?:confused:


Originally posted by muff
-Complete electrical. Battery, coil, etc. everything! stock headlight switches have been removed, now has a kx kill switch start button and pro design tether switch that is wired in. $125


:o

[muff]

another pic...

[Brad]

reserve that fcr for me, paycheck this thursday then saturday, then next thursday, but i need a carb

[quadmx7]

when u say $450 for the fame, does that inclue the swingarm, if not how much is the swingarm? do you still have the palstic?

[muff]

Originally posted by quadmx7
when u say $450 for the fame, does that inclue the swingarm, if not how much is the swingarm? do you still have the palstic?

$450 for the frame, subframe, and motor mounts. Swingarm is sold and I still have the plastic unless the kid who first posted gets back to me about em.

[quadmx7]

aight im gonna see about that frame if i can afford it and if that kid doesnt get back to u by thursday on the plastics let me know

[muff]

Originally posted by quadmx7
aight im gonna see about that frame if i can afford it and if that kid doesnt get back to u by thursday on the plastics let me know

if that one is to much I have another one:
'99 frame and subframe, straight, good condition. painted red early this year and has only several scrapes and scratches. has bill of sale. has also been guesseted under the front shock mounts. One of the top motor mounts is cracked, and a front motor mount bolt nut has snapped off. $275, or $400 sandblasted with powdercoat of your choice and the nut and mount welded up

[ny300exrider]

hey can you post a side shot so i can see the front wheels and tires better. are the stock rims beat up and dented? would you do 150 shipped for them or work sometihng out on shipping

thanks

[trick450r]

Muff what are you building now man?

[ZRider400]

How bad is the bend on the AC Bumper?

[muff]

Originally posted by ny300exrider
hey can you post a side shot so i can see the front wheels and tires better. are the stock rims beat up and dented? would you do 150 shipped for them or work sometihng out on shipping

thanks

i'd do $170 shipped



Originally posted by trick450r
Muff what are you building now man?

yfz, actually I found one that I really want to buy now, I was gonna wait til the end of the season, but I just cant resist the urge to buy that one



Originally posted by ZRider400
How bad is the bend on the AC Bumper?

the bumper itself is straight, its the mounts that are bent, I will be a picture later to show it

[muff]

heres a pic of the bumper that i took today, the rest of the pictures are in the first post :cool:

[blasterkid]

just out of curiosity those a arms look chipped and kinda rusted and you said your selling them buyers choice of color does that mean youll powder coat them.. by the way awsome bike

[muff]

Originally posted by blasterkid
just out of curiosity those a arms look chipped and kinda rusted and you said your selling them buyers choice of color does that mean youll powder coat them.. by the way awsome bike

yes the a-arms have chips in the powdercoat, i'm going to get them powdercoated before they reach the buyer

[sandthrower]

How much for the steering stab????

[Florida400EX]

I have first dibs on the GT thunder rev box.

[300exHILLER]

yfz, actually I found one that I really want to buy now, I was gonna wait til the end of the season, but I just cant resist the urge to buy that one


Trader, whats wrong with the honda? I'll get you a good deal and maybe a sponsor too.

[muff]

Originally posted by 300exHILLER
Trader, whats wrong with the honda? I'll get you a good deal and maybe a sponsor too.

sorry man, i found a hopped up one for sale that i just cant resist. i could barely hold onto the thing when i rode it :eek2:

[f1502nv]

are the bars 1 1/8? if so how much for the bars and hubs?

[quadmx7]

do u have any pics of that red frame and sub frame?

[muff]

Originally posted by f1502nv
are the bars 1 1/8? if so how much for the bars and hubs?

bars are taken sorry, you interested in the front or rear hubs?

[f1502nv]

im intrested in the fronts but are the rear stock?

[muff]

Originally posted by f1502nv
im intrested in the fronts but are the rear stock?

the rear hubs are stock and powdercoated translucent blue

[muff]

Originally posted by quadmx7
do u have any pics of that red frame and sub frame?

sure do, just took this pic earlier, they are a little dirty, havent really had time to clean them yet

[quadmx7]

that looks a little rought, but u say i can get it powdercoated any color for $400 right? ima see if i cant scrape up some money

[steveatv3]

im not making any promises muff but im eyeing up the plastics and bar clamp!

[scott34]

would you trade a stock 400ex motor and some money for your motor?

[FF1O5]

if florida400ex dosent take the rev box I will

[Florida400EX]

Originally posted by FF1O5
if florida400ex dosent take the rev box I will

It's mine :D

[muff]

Originally posted by quadmx7
that looks a little rought, but u say i can get it powdercoated any color for $400 right? ima see if i cant scrape up some money

yes, $450 shipped to you with brand new powdercoat :cool: If you are seriously interested I can get the frame out to the powdercoaters sooner so you wont have to wait as long later on, but you'd have to be certain that you wouldnt back out.



Originally posted by steveatv3
im not making any promises muff but im eyeing up the plastics and bar clamp!

hate to tell ya but I think they're both already taken :(



Originally posted by scott34
[B]would you trade a stock 400ex motor and some money for your motor?B]

sorry I dont have any use for a stock motor, heck I have another practically stock one for sale. During next week I will probably throw the motor on ebay, they seem to sell very well on there.

[quadmx7]

sorry muff but it doesnt look like im going to be able to buy the frame from you. i really wanted to take one of them off of you hands but summer is almost over and i dont have much money left and dont think i should spend it on a frame unless i have to. you get what im saying.

[muff]

its alright, I think i'll stick it on ebay and see how she goes

these parts are goin quick!

[quadmx7]

do you have a pic of the sparks pipe? my cosuin i race with needs a full system for his 440?

[muff]

theres a pic of the dent in it in the first post...heres a shot of the exhaust when i got it...i can get more recent pics tomorrow

[quadmx7]

aight thanks, how did you get your stainless steel x6 too look that shiny and silver in that pic? mine looks more gold.

[muff]

Originally posted by quadmx7
aight thanks, how did you get your stainless steel x6 too look that shiny and silver in that pic? mine looks more gold.

i bought it new. the header has turned colors now, but still shines up good

[modracer5]

check pm

[muff]

Originally posted by modracer5
check pm

..and sent one back at ya :cool:

[muff]

bump

[AC 400 ex 02]

bump:cool:

[yoshimurakfx400]

how much do u want for the wheels and tires together?

and how much would tou want for th front shocks?

[quadmx7]

hey muff, did u get thoes more recent pics of that exaust?

[muff]

Originally posted by quadmx7
hey muff, did u get thoes more recent pics of that exaust?

sure did, it is more of a goldish color now

[muff]

Originally posted by yoshimurakfx400
how much do u want for the wheels and tires together?

and how much would tou want for th front shocks?

I want $150 +shipping for the front wheels, the front shocks and rear hipers are sold.

[muff]

the quad is all apart. parts are all ready to go! if you told me you were gonna buy somethin, get back to me and send the payments on over :cool:

[muff]

nother pic...still got some parts left to go :macho

[Florida400EX]

Muff, I sent you your money paypal for the GT thunder rev box. Get it shipped ASAP!!!

thanks for the good bussiness!

[muff]

bump

[muff]

bump

[blasterrider123]

hey man thanks for the old style ac pro pegs man those are gonna look awsome and ur verry good person to do busness with