Chanman420q
07-19-2004, 08:36 PM
this is my baby but thinkin i want a car now and really not much into the whole riding scene as much as i was, if i cant sell it whole for what i want, ill most likely part it out.....
* Maxxis Razrs 20/11/9 Rear 6ply ( stock rims, 75% tred )
* Maxxis Razrs 22/7/10 Front 6 ply ( stock rims 80 % tred )
* Maxxis Razrs 18/10/8 Rear 2ply ( .190s 95% tred )
* Maxxis Razrs 20/6/10 Front 4ply ( .190s 975 tred )
* Uni Air Filter
* FMF PowerCore 4
* 909 HandleBars
* Douglas .190 Rims
* 909 Grips
* PEP ZPS front Shocks
* PEP Full AfterMarket Rear Shock
* Maier Red Plastic
* Pro Design Kill Switch
* No Air Box Lid
* Weisco 87mm Piston 11:1 Comp
* 5 Angle Valve Job
* LSR Parking Brake Block off
* ProDesign Alluminum Shifter
* RTC Clutch Perch and Lever
* Herrmann +2 A-Arms
* Hot Cams Stage 2
* PowerMadd Hand Guards
* Maier TRX250R Hood
* Snorkel Block Off
* Breaking Rear Rotor
* Roll Design Foot Pegs
* LSR Axle
* AC Standard Nerf Bars
* CR250 Kill Switch/Start Button
* AC Front Bumper
* Nacs Case Saver
* RK 520 Chain
* Nacs Number Plates
the motor has about 6 hours on it, thats on the piston, bore, new valves, hot cam 2, valve springs and rocker arms. the entire top end was replaced. was about a 1000 dollar job and have receipts to prove it. I want 4900 for this. the suspention alone is worth over a grand. Located in New York. Only trades are for Cars.
http://www.imagestation.com/picture/sraid116/pd7c25157f2ce5716d269b68f51493f7d/f8b6a396.jpg
* Maxxis Razrs 20/11/9 Rear 6ply ( stock rims, 75% tred )
* Maxxis Razrs 22/7/10 Front 6 ply ( stock rims 80 % tred )
* Maxxis Razrs 18/10/8 Rear 2ply ( .190s 95% tred )
* Maxxis Razrs 20/6/10 Front 4ply ( .190s 975 tred )
* Uni Air Filter
* FMF PowerCore 4
* 909 HandleBars
* Douglas .190 Rims
* 909 Grips
* PEP ZPS front Shocks
* PEP Full AfterMarket Rear Shock
* Maier Red Plastic
* Pro Design Kill Switch
* No Air Box Lid
* Weisco 87mm Piston 11:1 Comp
* 5 Angle Valve Job
* LSR Parking Brake Block off
* ProDesign Alluminum Shifter
* RTC Clutch Perch and Lever
* Herrmann +2 A-Arms
* Hot Cams Stage 2
* PowerMadd Hand Guards
* Maier TRX250R Hood
* Snorkel Block Off
* Breaking Rear Rotor
* Roll Design Foot Pegs
* LSR Axle
* AC Standard Nerf Bars
* CR250 Kill Switch/Start Button
* AC Front Bumper
* Nacs Case Saver
* RK 520 Chain
* Nacs Number Plates
the motor has about 6 hours on it, thats on the piston, bore, new valves, hot cam 2, valve springs and rocker arms. the entire top end was replaced. was about a 1000 dollar job and have receipts to prove it. I want 4900 for this. the suspention alone is worth over a grand. Located in New York. Only trades are for Cars.
http://www.imagestation.com/picture/sraid116/pd7c25157f2ce5716d269b68f51493f7d/f8b6a396.jpg