Maier kil switch on a blaster

[Freestylemxr]

This is probably a stupid question, which wire do I ground, and what do i do with the other wire?

[bradley300]

if you wopuld like to remove the on/off switch, key and headlight switch, follow the wires out of the box on the handy bars. look for a solid black wire and a black wire with white stripes. these wires along with the others plug into either a black or white plug in(i forgot wich color it is) on the side of the plug in opposite the box, cut the black wire and the black wire w/ the stripes, connect a kill switch wire to each of the blaster's wires ( dosent matter wich wires go where).

make sure it works, the put some dielectric grease on it and wrap it in electrical tape. soldering the wires is another good idea.

another way to do it is to just connect each kill switch wire w/ one of the wires on the key itself

[Freestylemxr]

thanks a lot!:D

[bradley300]

no problem, i just did it the other day myself, so its all fresh in my head still