12 Bars

[TJ240z]

i tryed to do a search on this, but its tough since 12 is under the minimum word length, anyway il mooking for a 12 o clock bar for my 400ex, any one have one or know of any companys that make them, freestyle inginuity dosent, if there isnt anyone who makes them ill just fab my own but i wanted to check if the were made.

[TJ240z]

so i guess i should just make my own?

[Bill Fuller]

Sorry I haven't heard of a 12 o'clock bar:confused: What is it,the bend or disign?If you make some post some pictures I would like to see them.

[RH1N08d9]

Originally posted by Bill Fuller
Sorry I haven't heard of a 12 o'clock bar:confused: What is it,the bend or disign?If you make some post some pictures I would like to see them.

it's a bar that extends outa the back end of your bike for doin 12 0' clock wheelies,(strait-up) so you don't beat up your rear end!

you could try www.midweststunters.com I'm pretty sure they made 12 bars for streetbikes, and 50s, but I'm not sure about quads! I don't really think you need one for a quad though, a grab bar works just fine, If you need to, go to www.stuntlife.com and register there, and ask in the dirtbike/atv forum, someone thre will know!

http://www.midweststunters.com/images/brian50apehanger9thst2003.jpg

there is a picture of a 12 bar on a 50.

[Nausty]

i'd just make your own, I cut a pipe in half and bolted it through the wheelie bar and then once it starts wearing down to the wheelie bar I change it. If you scrape a lot you'll need to change it a lot. One night of scrapin on mine and it was done.:o

just a couple things about scrapin:

if you use titanium it makes a TON of sparks and looks pretty sweet!

Also you will be able to scrape a lot longer if you turn up your idel.

oh yea, pavement+skin=hamburger.....:(

[TJ240z]

thanks for the replys, and yeah the stock grab bar works fine, but if you wheelie enough and are constantlly using it its going to bend up little by little, and once it gets high enough you start to scrape your exhaust up, so insted of replacing the whole sub frame id rather put a stronger one on. ill keep looking making one is the way to go though i think.

[Mxjunkie]

i think im gonna make one for my cr, looks easy enough to build :D

[jlbdjb2000]

might wanna try a small tire to help save metal. be a smother wheelie

[RH1N08d9]

just a couple things about scrapin:

if you use titanium it makes a TON of sparks and looks pretty sweet!



does anyone know if hardware stores would have titanium, or where I could find some?

Also, it would be cool if someone could bolt some skate board wheels on the grab bar!

[44oEX]

cut off yours and make a couple holes and a 300ex grab bar will bolt right up. you could add a plate to make it last longer.http://www.imagestation.com/picture/sraid103/p5a67300b8cf845db800b74240f790622/f9a670b0.jpg