PDA

View Full Version : Uh oh i did it this time



JHF219
07-18-2004, 06:16 PM
Guys im having major issues with my 250 for some reason the crankcase oil is being burnt by the motor? whats going on ? is there a seal thats out? also while i have this motor apart i want to make my clutch easier to pull ? what parts do i need to order? i have an 86 motor?!

AtvMxRider
07-18-2004, 06:29 PM
Sounds like you have a bad crank seal.

TheFontMaster
07-18-2004, 07:49 PM
I'm not shure about it burning oil, but to make the clutch easier to pull just grease the cable, I think that should help.

ZRider400
07-18-2004, 10:27 PM
mine did the same thing , was burning tranny oil. i first thought it was the seals then noticed it blew out the center case gasket inside where the c-balancer is:o

the_hulkamaniac
07-19-2004, 06:54 PM
Crank seal sounds about right. Anything else and it will be collecting somewhere or just leak out. Check your stator case it may be getting in there.

As for the clutch, part # for the update kit 06220-hb9-305. A definate must have. How's the basket, if worn/riged replace it. Get a hinson, there excelent. A new cable wont hurt if your's is old.

Have you rebuilt the bottom end? It is an 18 year old motor now, it could be time to freshen it up.

Hope this helped.

250rmike
07-25-2004, 07:18 PM
prolly a crank seal you could also get a magura hydro clutch