carb mod for crf450??

[C41Xracer]

Ive been hearing about a carb mod for the crf450 and was wondering what it was and did.Also where could i see some pics or more info on this.

Thanks
Charlie

[TC426EX]

There is an FCR carb kit that is modified by mark baldwin at baldwin motorsports. If you go to their website and go about 1/2 way down the first page you will see it and a pic.

www.baldwinmotorsports.com

[C41Xracer]

why couldnt i use the carb that came on the crf450?What does the mod do??

[cals400ex]

i have a crf450 carb, but it isn't on the bike yet. you need to rig up an intake adaptor because this carb is shorter than the stock one. i would get a hold of quadzilla. he is running this setup right now. he seems to have good luck with it. also, he reads on thumpertalk a lot. i guess this is where they talk about the carb mods.

[redrider05]

hey guys i think he means for the actual crf bike or the engine in quad frame not the trx

[Quadzilla]

This is the easiest way to do it (if you have $65 laying around)-->Click Me (http://www.nossmachine.com/honda_quad_parts.htm)

If you don't have the cash, you can make an extension yourself. It's a bit of a pain, but do-able. I used a piece of 2 1/4" exhaust tubing that I cut to about 3/4" in length. I then found a piece of radiator hose that fit it snug. This will go in between your airbox snorkel and carb with a couple of hugh quality hose clamps. It was a perfect fit. Cost about $20 in parts (exhausr tubing, radiator hose and clamps). Good luck!

[Quadzilla]

C41,

Do you mean putting a CRF carb on a TRX (400 or 450r) or what????

[C41Xracer]

I put a crf450 in a Warlock 250r chassis and seen some people saying they did the carb mod on the carb on there crf motor.