got some pics scanned

[K_Fulk]

here is a pic of my ex

[K_Fulk]

If i emailed someone the pictures could you get them to fit.

[JustRace]

I'll give it a shot.

[K_Fulk]

I sent them too ya good luck

[JustRace]

1

[JustRace]

2

[JustRace]

3

[K_Fulk]

Thanks for posting them. I cant ever get them set up right.

[JustRace]

no probs man. Thats really sharp looking

[Tommy 17]

that quads awesome man... i really like how u took the front fender decals and put them on the lower rear fender... ur frames aweesome 2...

[Sparkles]

sweet bike:D

[hetrick425ex]

wow man, nice bike, i cant wait till mine looks like that... :)
Later Guys
Casey

WHAT KIND OF RIMS ARE THOSE(FRONT AN BACK) WHAT BRAND ?????? WHAT SIZE ??????? WHAT TIRE SIZE ?????

thanks !!!!!

[Dave400ex]

That is Sweet. What kind of PEP Shocks do you have? How do you like the RPM Front Hubs? That is really Nice.

[K_Fulk]

Thanks for the compliments.
jfboy, those are 8 inch douglas beadlocks on the back with some 18 inch tamers. The fronts are itp's with reinforcing rings on each side. with the 19 inch holeshot mx's.

warriorman, Those are limited mass shocks. I got the hubs beacuse i dont like to change those stock front bearings and those taperd bearings last forever. And i had my engine builder put some grease zerks in them. So i wouldnt have to repack them. They work great.RPM makes real nice stuff its a little more expensive but there quality is first rate.

There are a few spots where the graffic kit didnt lay down that good. But that was the first one i put on.

why doesnt it have fenders?

[DEAL]

They are race cut :rolleyes:

[Wired]

haha, why doesnt it have fenders?........ retard:rolleyes:

[brink400]

Sweet. That is one of the nicest looking 400's I have ever seen.

[Dave400ex]

K_Fulk, How do you like the Shocks? What is Done to your Rear Shock? RPM is Top Notch. I want to go with RPM on my 400. I didn`t think they made Front Hubs though. Do they make Rear Hubs?

[VegasEx'r]

That is a nice looking quad. What graphics kit is that? I've never seen it before.

[K_Fulk]

warriorman-The shocks were originally valved for xc but i moved the clipd down 3 on the front and stiffend the back up as much as i could. There not bad now. It finally got dry enough to try out the last few days.The hubs are the same as the 250r ones. You have to use 88-89 250r caliper bolts $6 bucks a pop.They should have rear hubs now but they didn't recomend them for mx.

Vegas- It is a old style black and grey ceet graphics kit. I picked it up at the dennis kirk scratch and dent store. When i was up at my buddies house in Duluth.

[EX Fanatic]

That's one sweet bike!!! ;):)

[Dave400ex]

Thanks for the Info K_Fulk. That is a Sweet Quad.

[ChadEXer]

Definatley a sweet bike. kinda makes me think I should have kept my stock plastic with the FX graphics on it!! it was brand new plastic and i sold it to get some of that new Shiny White Maier plastic and put the same graphics on the white!! Oh well the Maier shiny plastic only costs me $118 with my 60% off sponsorship!!

[Dave400ex]

60% off? You could get me some of that Silver or Dark Blue Plastic for Cheap.

[K_Fulk]

Silver would be sweet. I like the orange but i dont want to re powder again.

[Dave400ex]

Why would you Re-Powder?

[K_Fulk]

If i got orange plastic. I would redo the frame blue. I just dont think it would look right with a red frame and orange plastic.

[Dave400ex]

Blue would look ok. You could do a Gray Hammertone or another Dark Color.

[ChadEXer]

I just got back from the Powdercoating shop. its going to be red with gold sparkles on everything but the frame which will be black with red & gold sparkles(also looks like it has a touch of blue sparkles in it) They didnt have a red with black sparkles and black with red sparkles like i wanted. he said it willl be about $200. thats is a damned good price!!!

[Dave400ex]

I hope those Colors turn out Ok. Only $200 Bucks for Everything?

[ChadEXer]

Those colors arent for sure yet. My wife is taking my heat shield and airbox up there with me tommorrow and she is going to look at the colors!! Cant wait:rolleyes:
She says i should do red a black with silver sparkles. I dont remember if they had that!

[400MXer]

K_Fulk - they didn't recomend rpm's rear hubs for mx....why? i was going to get some.

Dude I love them bead locks and tires whats the names of those two I know those are ITP but what are they xc or mx ....And what are the name of them front bead locks they are sweet.....

back

by the way dude is it hard to powder coat the frame...like takin apart and puttin back togather....

[Dave400ex]

I wouldn`t want Gold or Blue Sparkles. Just do Black and Red. I like your Wife`s Setup.

[K_Fulk]

400mxer- They said beacuse there aluminum. They said they would be ok for TT.

Topgun- The backs are champion beadlocks. Champion uses dougals red labels. and i have cut tamers on them. The itp .190's (3inch in 2 out) with holeshot mx's 19x6x10. Its not hard to take everything off to powder coat. It just takes some time and patience. If you forget how something goes on just go and look at a buddies 400. Nice 400 too.

It only cost $150 to powder coat my frame but i didn't get any sparkles or any thing in it.

[Dave400ex]

K_Fulk, Did you Gusset your Frame? Do you have anymore Pictures?

[K_Fulk]

I didn't gusset it. I have more pictures i could scan but there all older. I'll post some more after i get from lil. sahara at the end of the month. I should get some good ones there.

[Dave400ex]

You will have to look for all the 400`s up there. I bet you will Find some Crazy ones.

[K_Fulk]

I hope my stroker is done by then. Mine should be pretty crazy.

Here is a pic of some guy i took at silverlake last year. ten minutes after i took this pic he landed on a dunebuggy. It was all stock too except for the nerf bars and axis shocks.

[Dave400ex]

Well at least he had Axis Shocks. He is getting some Air. You should see the Pictures of Gabe Jumping. That Guy is Nuts.

[K_Fulk]

I have seen some of gabe's pics. And he gets a lot of air too.
The guy in the picture wasn't even all the way up there either that was right after take off.

I will jump but nothing over 30 feet long. I just don't have it (testicular fortitude).

Here is a pic from last september of me jumping a small double in wisconsin. My wheeler was a lot diffrent then.

[Dave400ex]

You have the Suspension to Jump high now. That Picture is Cool. Is that your Track?

[K_Fulk]

no it was at lake nebagaman in wisconsin. about 20 minutes from superior. I went there with some guys i know.
I need to get some pics from our track. It has better jumps.

[Dave400ex]

How Big is your Track?

[K_Fulk]

Its only on a acre but it has 3 regular doubles, A uphill double, an uphill tabletop, and 2 whoops sections. The big double there is a bit bigger than the one in the picture. But my buddies dad has huge John Deere loader and another guy we ride with drives dump truck and hauled in 8 truck loads of dirt.

[Dave400ex]

My Brother wants to Build a Track this Summer. We can get a Bulldozer and Bobcat. We have to find Dirt though.

[K_Fulk]

The guy with the dumptruck was working for a construction company and they told him to get rid of this dirt. So we took it. we lucked out on that.

[Dave400ex]

I hope we can Find some Dirt. We really don`t want to Pay for Dirt that we are going to be Jumping.

[K_Fulk]

maybe you can bury some junk cars so you dont use that much dirt.

[Dave400ex]

My Mom would Kill us.