Another HRC Problem...

[1fast450R]

I had the Hrc kit installed and now when you first start it it idles fine, but once it heats up it idles super fast, and the idle knob is set as low as it goes. what is wrong here????

[CdaleXtreme]

You are most likely way to lean on your slow jet, or you could try to lower your clip on your needle. Sounds like its getting way to much air.

Make sure your throttle isnt sticking part way open. Check the adjustment for about 1/8 inch of slack.

Check your spark plug and if its white you are prob. too lean.

[1fast450R]

my buddy is a honda and harley mech. He said I may have to drop the needle, he said to also check and make sure i wasnt sucking air from anywhere,,,

[Insider]

Originally posted by 1fast450R
my buddy is a honda and harley mech. He said I may have to drop the needle, he said to also check and make sure i wasnt sucking air from anywhere,,,

thats 2 poeple that have told you what to check...

now lets get it done:macho

[REDARMYRACER]

my machine idles funny also when it's warmed up, i thought it seem like the machine was looking for a happy medium as far as idle rpm I.E. CAMMING OUT i'm not sure though