RedsRacing
07-11-2004, 08:42 PM
I just had my lonestar a-arms chromed and am trying to install them. On LSR's website it says to screw the caster heim joints (on top arms) in all the way and then back the rear one out 3 turns for a starting point. Well, my problem is, all 4 of my heim joints will only thread in about half of the threads. Is this normal or do I need to run a tap down through the arm. All four seem to bottom out at the same place. It seems to me running them like this (half of threads showing) would weakin the heim joint. I would guess they should thread completely in. Any help would be appreciated. Thanks.