PDA

View Full Version : My jetting is not right!!!



REDARMYRACER
07-08-2004, 05:25 PM
the bike runs great when it's winding out every gear, but under low rpm a stab of the throttle it only sputters. my hill climbing abilitys suck now too. the bike just isn't running good unless it can really wind out the gears.

i got a full pipe, hrc kit, esr intake, with a 205 main jet

any suggestions on what to do would be appreciated.:confused:

440ex kid
07-08-2004, 05:33 PM
You may need a bigger pilot jet. I dont know what stock is but try a few sizes bigger.

RedRaider
07-08-2004, 05:38 PM
You might try adjusting your fuel screw if you haven't already.

PJK 450R
07-08-2004, 07:42 PM
I had to rejet when i got the CS pipe. I went to a 190 main(f185),50 pilot/slow(f48),5th clip on the HRC needle(f 3rd), and 2 1/2 turns on the air/fuel screw. That got rid of the throttle off deceleration popping that i got when i installed the pipe.:D

rap169
07-08-2004, 08:23 PM
check your plug, but a 205 seems way to big. Id say it should be a 195 or smaller, but no smaller then a 185.

RoadkillerRyan
07-08-2004, 08:52 PM
Originally posted by rap169
check your plug, but a 205 seems way to big. Id say it should be a 195 or smaller, but no smaller then a 185.

ya id bring it down to a 190 or 195

250rtone
07-08-2004, 10:00 PM
That thing is jetted way to fat... try the 190-195 like suggested.