jetting for LRD system?

[1fastR]

just got my lrd stage 1 kit last night, full pipe with filter and jet kit, anyone running this system what jets are you using, they give you just basic info to go off of, would like to get it right the first time.

[1fastR]

ttt

[400rider01]

190 main
152 pilot
is what i am running and it runs great

[400ex4ever]

Originally posted by 400rider01
190 main
152 pilot
is what i am running and it runs great

I have the same setup as you and have a 195/52 right now. I took to to the dunes in Oregon last weekend and it ran pretty good. But I have heard that it will run with almost anything. What notch is ur clip on the needle. LRD said I might have to move to the 4th or 5th. I am still on the 3rd, but will be trying it out. Oh yeah, What elevation are you at? I am right at sea lavel.

[1fastR]

have not had a change to ride it yet, just got done tonight, lrd said run 180/52 with clip on the 5th position thats what it is at right now

[1fastR]

one more thing whats your guys air/fuel screw at, how many turns out? just wondering.

[400ex4ever]

If I remember right I am out 2.5 turns.

LRD told you to run a 180. They told me 190/195? Do you have the HRC kit/cam? Maybe that is why they told me to go so big. I am going to drop the clip this week and drop down to a 190 main for DUNEFEST in Oregon at the end of the month.

How's yours running with what they told you? Mine seemd to be running pretty good. But I keep reading that this thing will run with almost any jetting, just not to its full potential. Let me know how it's runnin. Thanks

[trents88r]

a friend of mine has got the same system and he runs a 195 main, and it works perfect

[400ex4ever]

Originally posted by trents88r
a friend of mine has got the same system and he runs a 195 main, and it works perfect

Ask your friend what notch the clip in on for the needle and how many turns he's out on the fuel/mix screw...Thanks

[asdf450r]

How much did you pay for the full system? (if you dont mind me asking), where can one find it? im somewhat interested in getting an aftermarket pipe myself and the LRD system seems to be one of the more favored.

Thanks :)

[400ex4ever]

No Problem...I got mine for Father's day. My wife said she got it off Ebay and only paid $380 and that's shipping included. We just got really lucky with it. I haven't seen them that low since but you might get lucky too. Good Luck. You'll love it when you get it

[400rider01]

my clip is in the 5th position and i am not sure what my elevation is but i live in northeast ohio. But the quad runs great with this setup.

[400ex4ever]

Thanks...I wil have to try it out. Just got to get one of those dam stipped out screws out. Do they make a hex/allen head style screw that we can use instead of that soft *** brass?

[adambomb]

Thanks...I wil have to try it out. Just got to get one of those dam stipped out screws out. Do they make a hex/allen head style screw that we can use instead of that soft *** brass?

I take it that you are talking about the screws that hold the plate on top of the carb or the ones that hold the bowl on...right? Either way the same thing happened to me and surprisingly enough I found exactly what you are looking for at Home Depot even with allen heads. You might try an Ace Hardware also. Good luck, hope you get it fixed.

[1fastR]

got to ride my 450 over the weekend with the new pipe, it ran very strong on the low end but top end was not feeling right, going to mess around with the main jet try a couple of different sizes and it should get better.love the pipe so far

[1fastR]

I put a new jet in today, I had a 180 put in a 185 and ran it around the street I live on, it runs better on top end now, anyone who has the lrd jet kit, is the biggest jet they give you a 185? thats the biggest I have for mine, I'am going to order bigger size jets and try them out to see if they make a change.