Parting Out- For Sale

[starky]

Wiseco 440 big bore kit with 12.5 high comp piston
-heavy duty springs w/ titanium retainers
-hotcam stage 2
-heavy duty cam chain
-hotrod crank and connecting rod, new bearings and seals
-fcr 39mm carb
-full curtis sparks exhaust
-silver maier racing plastics
-rear razr 6ply on red label .190
-Dirt Hooks on stock rims
-Elka Long travel quad rate front shocks with remote rez (top of the line)ssd
-Elka rear dual rate ssd shock with remote rez(top of the line)
-ASR +3 +1 long travel a-arms (life time warranty) with steel braided break lines
-LSR +4 axle(new)
-PEP steering stabalizer
-E brake block off(new)
-AC Propeg nerfs
-gusseted front shock mounts, where most frames crack
-new stock oil tank with welded neck for reinforcement and then Powder coated
-renthal bars and new scott grips

All the motor mods and parts on this quad has only about 5 to 6 hours on it. The motor was built by Gary at www.totalperformance.com
This quad is very fast and handles great. The quad also has a new flywheel and stator. The head was also Helicoiled for extra strength. Everything in the motor is new and has only been broke in. And im sure there is more, i am only selling to put money into my truck or will maybe trade for a nice Jeep ( CJ, YJ ect..)
Will sell it for $4600, Remember evything on this quad is pretty much NEW!! Feel free to call 320-235-4109 my name is Allen.

I will part this quad out if the deal i have pending on trading for a Cj does not go through. I would like to have everything spoken for with price offers. I know i want no less than $1400 for front and rear shocks, and $350 for the carb. All is in very good or even mint cond..

[sandthrower]

How much for the PEP steering stabalizer

I should if had one but some **** head ripped me off Now he is parting it out becuase he can't handle 2 stroke power:macho

[cals400ex]

how much for front and rear shocks and the carb?

[400exKy1e]

how much for the rear rims and tires?

[fyffe23]

how much for front a-arms and shocks?

[Ross318]

How much for the sliver fronts only?

[starky]

Pep stabalizer $75, Mint cond..

Front Elka's, rear Elka's and FCR39 $1600 (pretty much mint)

Rear rims and tires $75 Nice rims and 85% on tires

Front arms and shocks $1000

Maier Race plastic Front and rear with seat $275 ( will only sell as a set, it also has K&K graphics)

[brian-250]

how much shipped to 46052 on the nerfs? do they have heel plates?:)

[starky]

No heel plates, that is michigan right? $120 shipped, good condition with black nets.

[brian-250]

hmmmmm, $165 with them $120 w/o,hmmmm, do you have a pic? no its IN;)

[starky]

whats your email?

[brian-250]

kcasey@accs.net thats my MSN messenger name to, if you got that;) :p

[starky]

pics are sent.

[01_300ex]

How much just for the front shocks.

[EX4me]

How much for the FCR carb??

[starky]

$350 for the carb. All is in very good or even mint cond..
Has some extra jets also..

[sandthrower]

You have a PM

[10secKing]

how much for exhaust and axle? and is it x6 or x4 shipped to 73107?

[starky]

The Exhaust is a X6 with the silencer cut down, it helped a lot with the low end, it is tarnished a little. $190
Mint LSR +4 axle, shiny chrome. $275
All prices plus shipping. Almost every part is in ver very good condition or even new.

[starky]

Add $50 total to ship the axle and Exhaust. The axle is pretty much brand new with only 7hours on it.,

[starky]

I also only ship UPS with tracking # provided.:D

[10secKing]

Originally posted by starky
The Exhaust is a X6 with the silencer cut down, it helped a lot with the low end, it is tarnished a little. $190
Mint LSR +4 axle, shiny chrome. $275
All prices plus shipping. Almost every part is in ver very good condition or even new.

can i get some pics of both of them: stroked_67camaro@hotmail.com

[starky]

sure you can....

[Xowner]

how about a streering steem and belly skid? pics? headlight? jpsshack@fuse.net

[redracer57]

how much for the rear shock? whats it set up for? can i get asome pics of it? dukezip01@yahoo.com

[Dave400ex]

Do you have front brake rotors?

[400exKy1e]

can u shoot me some pics of the rear rims and tires? also what size are they?

[starky]

everyone who would like a part PM me. With your email and i will get pics. I would like to have most of the stuff off the quad spoken for. $1300 for front and rear Elka quad rate, and Elka Rear Dual rate with remote rezzis. And FCR carb 39mm for $350, its the MX carb with extra jets. I am parting out the whole quad.

[pead_24]

how much for the parking brake block off plate and renthal bars shipped to 17881?

[flyingbyfast400]

Hey how much dp you want for the motor? with and without the carb.... Is it a race gas only motor? Thanks Vic
Get a hold of me at farmerstudly@hotmail.com

[starky]

front rotors for $30, or $120 with rotors and calipers.

[400exKy1e]

i sent u a PM the other day.. still waiting for pics of the rear rims/tires and tire size... kylekenter@yahoo.com

[Kilabanshee]

Ill take the stabilizer if its not sold yet.

[DAB516]

COuld I get pics of the plastics sent to DBritton19@hotmail.com

[honduh440]

what color is the oil tank and how much are you asking i am in need of it this week!

[rob12]

Clean your box---I got a Pm for ya

[spudss]

Your box is full...............


How much for the Steering Stem,Renthals,&Plastics....Prices fot the total package and Individually Send pics to rnkglenn@yahoo.com Do you have an Antivibe also??? Thanks

[mxquadracer]

how much is the motor alone, without shipping?

[redoy]

How much for the LSR axle?

[Atreyu]

Could I have a pic of the Sparks? Shiftex03@yahoo.com Very interested. Thanks.

[Cody_300ex]

You wouldnt happen to have some motocross rear wheels and tires with some decent tread would ya?

[steveatv3]

I will get the check sent out today. Dont worry i am deffinitly going to buy your quad. I got a FMX contest today so ill get everything sent out sat. morning

[hondapunk]

can you send me pics of the sparks pipe jimbo300hex@hotmail.com thanks

[steveatv3]

Originally posted by hondapunk
can you send me pics of the sparks pipe jimbo300hex@hotmail.com thanks

what part of sold don't you understand???

[starky]

The quad is Sold. Awaiting payment.

[steveatv3]

dude you never told me that the stem was bent back to the tank, and the swingarm bearings are shot ! and when i asked you if it was ready to go over the phone you said yes, now i got it and learned it needs a headgasket and a carb.

I payed you 3,800 you wanted 2,900. the point is i feel like i was ript off and i would like if you can some how compensate me for the my LOSS. either i would like the carb or $600 back from what i payed you to cover a carb, stem, bearings, gaskets. you may have written it on the site that i see now! i feel like you purpously deceived me when i even told you i will need it for this weekend for an event!

[starky]

Well whne i sent the quad out the Stem was surely not bent! And its not my fault you can't read the add. It said right in the add, no CARB and NEEDS HEAD GASKET! ASk anyone, its not my fault that you didnt read the add. If it was ready to go i would have sold it for a helll of a lot more than $3800 shipped. And you never asked if it was ready to run, you just assumed, so dont be a all pist off at me. READER ERROR. And this isn't even the post that i sold the quad off of. The original post says , Honda 440ex (race ready)