PDA

View Full Version : cut tire



red2004 TRX450R
07-01-2004, 11:15 AM
I have a 3/4in cut in the sidewall of the front tire. I took it to two tire shops to get it patched and both would not do it.

SO what should I do

Pappy
07-01-2004, 11:16 AM
fill her full of plugs or junk it:(

07-01-2004, 11:36 AM
Or spend the cash and put a tube in it..

jlhughes750
07-01-2004, 11:38 AM
find a truck garage!!! ask them to do it or ask them to sell u a plug patch...Its a patch with a plug in the center. There different sizes... I got a friend thats a truck mechanic!! It works great.

07-01-2004, 11:39 AM
take a piece out of an old tire sand it down pretty thin and clean sand the inside of your tire reall cleanheat both pieces untill they are melting and them add some glue and press the patch on it!!!!!

ReddRacer250ex
07-01-2004, 09:58 PM
1 or 2 rope plugs should do the trick.

smith_400ex_213
07-01-2004, 10:55 PM
what kinda tire is it and how much does a new one cost

pead_24
07-01-2004, 11:45 PM
i just had the same problem with my front 6 ply razrs like a 3 inch hole in the sidewall so i slapped like 8 plugs in it:D :p

Meek
07-01-2004, 11:51 PM
Just have Tire Balls installed:D

red2004 TRX450R
07-02-2004, 07:51 AM
well i put 4 rope plugs in it and it seams to hold air! but the side wall on one side is pushed in and the other is pushed out!!
they are stock 450r radials!! and im afrade that the cords are cut.
I birthday is next week and gess what I asked for?