Your dream quad

[roostin_dale]

We've had a few of these post but I figure we need a new one with all the new quads out now....

Post what your dream quad is, if you could only build one with any parts...

Mine is currently in process of being built...

YFZ450 Houser/Elka LT front end, Houser/Elka LT Rear end, Hipers, Houser steering stem, Tag bars, Sparks exhaust, LSR axle, propegs, quadtech seatcover...etc. etc. etc.

OR

Full Roll Design/Elka crf450 quad....:devil:

[416exmx]

Originally posted by roostin_dale
Full Roll Design/Elka crf450 quad....:devil:

ohhhhhh yeeeeesssss.... that would be sweet...

or a Full WALSH KTM520 quad... i have seen one before..

[Chef]

An LSR Titanium CRF frame, made strong enough for hard duning, with +3 Titanium Long Travel A-Arms, Long Travel Titanium Rear End, Rad Ti Axle, RPM antifade and front cylclone hubs, Braking Wave Rotors, All Chromed Calipers, My CRF500 motor, HiPers with white rings (too bad they dont make these) White EX Fullbore, Skat Trak's old style Mohawk fronts, and 20x10x10 10 Paddle Haulers. And Full Axis Shocks. I think that would friggin rail. :devil:

[brian-250]

XC 350 R:blah:


i would like to TRY to build an XC crf450, of KTM520:rolleyes: then again, id just as well pimp the reaky a lil more than it is now, elkas big bore all dat chit:cool: :blah:

[Punk'd]

E-Ton 6000:o

[roostin_dale]

Originally posted by Punk'd
E-Ton 6000:o

That would be awesome compared to your rancher 2x4:o

Originally posted by Chef
An LSR Titanium CRF frame, made strong enough for hard duning, with +3 Titanium Long Travel A-Arms, Long Travel Titanium Rear End, Rad Ti Axle, RPM antifade and front cylclone hubs, Braking Wave Rotors, All Chromed Calipers, My CRF500 motor, HiPers with white rings (too bad they dont make these) White EX Fullbore, Skat Trak's old style Mohawk fronts, and 20x10x10 10 Paddle Haulers. And Full Axis Shocks. I think that would friggin rail. :devil: id buy one

[Cody_300ex]

I would like to take a 450r and put a crf450r motor in it and Bore/stoke it to a 500r, port & poilsh, 41mm FCR, 13:1 compression, The most radical cam you can buy, oversized valves, Balance pro series HMF exhaust, Candy apple green PC, Burned orange fullbore Plastics, Burgard +1 Lt a-arms with Elka Elite shocks, HiPers, yada yada all the other little XC mods you gotta have.

[Sportrax10]

MX 450r- (PEP, or Axis) shocks, any major chassis company, all LT, Sparks motor/pipe, Kenda tires, Hiper rims, quad tech hood, etc...

I would die for a nice old 250r to restore too though...:eek: :cool:

[350Xrider]

totally modded z400 with stock fenders and graphics so know one would know it was modded so much by just lookin at it:devil:

[Narly R]

A Carbon Fiber Fourwheeler!:eek2: :huh


Well when I get my LSR/ELKA/CRF together that will be all I want!

[redrider69]

mine would prolly be a tottoly pimped out 92 250x with dark blue plastic and rebelflag seat cover lol naw

prolly a 250r frame with a CBR 900 engine with some +5 a-arms and axle to be jus as wide with elkas all the way around pink plastics and pink hypers so ppl would laugh and u would whoop that ***

[86350x]

A full custom banshee sand dragger (built by qc2) with Sophie sitting naked on it wrapped up in a furr coat.

Wierd huh:confused: :huh

[Fuchs105]

a 250r chassi with a semi truck motor! Can you imagine the tow capacity!?!?!

[ReconRider25]

my 400ex but with about 5 grand into it.:devil:

[250rmike]

either a complete houser/elka lt yfz that wont catch fire or a houser/elka lt c-dale that will accually be reliable for some reaon i just love the c-dale and the way it looked with shaved fenders and all done up for racing

[WalshKFX]

full walsh ktm 520, full walsh yfz450, full walsh trx450, full walsh z400 - nvm got that one. any quad with walsh products is baddass. i really want to built a walsh ktm in a couple years.

[250rmike]

what i said with walsh stuff also still elkas though

[roostin_dale]

Originally posted by redrider69
mine would prolly be a tottoly pimped out 92 250x with dark blue plastic and rebelflag seat cover lol naw


hhmmmmm..where hae I seen one of those before?
:eek2: :eek2:

http://www.imagestation.com/picture/sraid115/p6df9393241b3c4f243e3711570bdcd78/f8cb6508.jpg

[Ralph]

Originally posted by Lil_300Ex_Kid
I would like to take a 450r and put a crf450r motor in it and Bore/stoke it to a 500r, port & poilsh, 41mm FCR, 13:1 compression, The most radical cam you can buy, oversized valves, Balance pro series HMF exhaust, Candy apple green PC, Burned orange fullbore Plastics, Burgard +1 Lt a-arms with Elka Elite shocks, HiPers, yada yada the other little XC mod you gotta have.

Puke,,,,

[southbeach14]

a honda 450r that starts on the first kick every time:devil:

[Cody_300ex]

Originally posted by Ralph
Puke,,,,

Whats wrong with that? Or is it your just a mx guy that dosnt like xc quads?

[Ralph]

Originally posted by Lil_300Ex_Kid
Whats wrong with that? Or is it your just a mx guy that dosnt like xc quads?

orange + green = puke

[motoman00440es]

a full Leager/Elka/Hiper/TC CRF450 quad w/ front and rear LT :devil:

[ZSK]

Santo Derisi's quad with E-start.

http://www.imagestation.com/picture/sraid123/p51eee7b115871e84425f2486d5337e68/f824e2e4.jpg

[the-ex-files]

1989 Honda TRX250R. Brand new off the showroom, with cherry red plastic.

[TheFontMaster]

Right now i just want a stock 450, and hopefully that is soon to become a reality :D

[muff]

Originally posted by 416exmx
or a Full WALSH KTM520 quad... i have seen one before..

not only have I seen one...but i've ridden with one :devil: its truely badass

[mephyst]

I thought the CBR900 motor was cool... but where is all the custom frames and all the goodies w/ a modded out cr500 motor at? :cool: It CAN be done, if done right! :devil:

[Tommy 17]

tom berrys laeger pro trax 250r/ cr450f hybrid with a cr500 linkage and a narrow tpin front end...


exact colors and everything

[Mxjunkie]

roostin dales 250x :macho and bill balances 250r

[roostin_dale]

Originally posted by Tommy 17
tom berrys laeger pro trax 250r/ cr450f hybrid with a cr500 linkage and a narrow tpin front end...


exact colors and everything

Does he race Nationals? I was pitted to a guy with a quad just like that at Casey!

[300EXrider02]

Originally posted by the-ex-files
1989 Honda TRX250R. Brand new off the showroom, with cherry red plastic.

couldnt have said it any better

[310Rduner]

Originally posted by the-ex-files
1989 Honda TRX250R. Brand new off the showroom, with cherry red plastic.

Oh yeah.

Small change though, I'd still have the stock motor in the garage, but it would run on an Esr 370, with trx-11 centermount pipe. Instead of stock a-arm colors, make it all chromed.

My aunt's R is as close as I'm going to get to factory mint:

http://310rduner.tzo.com/St%20A's%20010.jpg

http://310rduner.tzo.com/St%20A's%20001.jpg

Only piped, ported and stainless steel lines, renthal bars. Everything else is mint from the factory.
I think it looks good next to mine :macho

http://310rduner.tzo.com/St%20A's%20076.jpg

For a second bike, a full laeger protrax quad, with axis shocks, chromed EVERYTHING, white fullbores, esr 370 powervalve, trx-11 centermount, hipers for all rims. I couldn't turn down the same kind of setup except with full roll design though :blah:

[Cole Trane]

Nice quads ^

[Out_Sider]

Tim Farr's 450r with the leager t pin front end and full fenders :D

[redroost85]

I guess for me it would be an mx ready hybrid 450 inside a Bud Fischer frame.

Full PEP ZPS, full JB, Hipers all around with MXR's, powdercoated everthing...yeah, let's start from that and go from there!:devil:

[400exbiggun]

686 raptor, with hipers all around, elka suspension, full bore fenders, extended axle and a-arms...and just a pipe. Thats all i want:D
And SOMEDAY i will get it:mad:

[Mxjunkie]

id like to have a lt500 with a 1300 busa motor in it worked with nitrous :D

[FreekShow]

Popo's quad :eek2: http://www.imagestation.com/picture/sraid102/p0fd11e53911d8a3b2cd297e05eeb6af3/f9bc3745.jpg

[Tommy 17]

Originally posted by roostin_dale
Does he race Nationals? I was pitted to a guy with a quad just like that at Casey!

yep... he races pro am i think...


his quad is identical in every way to tim farrs baldwin 450f... its built by balwin except his is orange and yellow where farrs is red and black... besides that they are pretty much identical!

[Mxjunkie]

i really like that baldwin yellow/orange quad :macho

[diesel-mech]

Just about anyone of the quads I've seen on this site:blah:

[trick450r]

I would love a 450r with walsh a-arms,swinger,tie rods,and steering stem, pep ZPS shocks, Baldwin Pipe, AC nerfs, Renthal bars, Klaws all around, pcoated pearl black frame, pearl black swinger, and pearl black lower a-arms, chrome upper a-arms and chrome subframe!! oh wait thats what my quad will be by next racing season...my mistake! and as another quad or should i say the other quad we are building a stock 250r chassis guesseted p'coated to match the 450r, cept with red fullbore and a ktm 450 or crf motor... mostly stock chassis for my dad!!!

[rollie]

either my quad tricked out with everything(working on it)

or a CRF450 engine in a 400ex frame with a black frame, blue fullbores, blue hipers, AC nerfs,black tag t2s, full gibson/axis long travel front end,AC bumber,LSR axle, holeshot tires,curtis sparks pipe, no graphics,guessted frame,black seat cover,and everything else:eek2: :)

[hond_rider52]

a walsh crf450

[honda_racer_713]

Originally posted by muff
not only have I seen one...but i've ridden with one :devil: its truely badass

just wondering muff where did you ride with one at cuz my bro did too..........but he got smoked:blah:

[DaveEX7]

Tim Farr's 450r:muscle: :bandit:

[trick450r]

Originally posted by honda_racer_713
just wondering muff where did you ride with one at cuz my bro did too..........but he got smoked:blah:

Proly wherever Mike Walsh was running...I live within 1 hour from Mike Walsh, and my dad does buisness with a guy whose son used to be sponsered by walsh Brian Osborne (almost bought his 250r)

[nickg]

i own mine, 2004 cannondale prototype with carbon fiber axle and a new 87 trx250r bought in 1987(has like 5 hrs on it):D i would post pictures, but I can't for some reason

[WOracing]

a bone stock 250ex;)

[QuadJunkies]

there are soo many........!!!:cool: but the one that sticks to me the most I would have to say Raths KTM520:blah: :macho

[Cripple]

Originally posted by Chef
An LSR Titanium CRF frame, made strong enough for hard duning, with +3 Titanium Long Travel A-Arms, Long Travel Titanium Rear End, Rad Ti Axle, RPM antifade and front cylclone hubs, Braking Wave Rotors, All Chromed Calipers, My CRF500 motor, HiPers with white rings (too bad they dont make these) White EX Fullbore, Skat Trak's old style Mohawk fronts, and 20x10x10 10 Paddle Haulers. And Full Axis Shocks. I think that would friggin rail. :devil: Perfect!

[NTPRacing#19]

the full walsh yfz i have now is my dream quad.

[Greg Z]

a WALSH / AXIS / CRF450 quad :) AND Hipers :)

[brian-250]

My 400ex, with about $4000 more in it.:)


OR, an XC crf450 quad.:blah:

[Mxjunkie]

Originally posted by brian-250
My 400ex, with about $4000 more in it.:)


OR, an XC crf450 quad.:blah:


i was expecting a recon with a aluminum frame and 100 horse or something creative from you :p

[QuadJunkies]

heres mine dream quad.....:D