406ex Stroker F/T Streetbike

[oriclez]

I have a 300ex, that is bored and stroked to 406cc. It is cranking around 40 Horses, and just got barley broken in. All the work is done by a certified mechanic, whos built some dragsters, and other high performance streetbikes.

Engine Work:
Stroked Crank
Bored to a 84mm jug(I think its 84mm)
11:1 Compression(you can up it to running race gas if you want).
Supper trapp full exhuast
Uni airfilter
Brand new Hardwelded cam
Brand new Hardweld rockers
I sent it in for massive headwork, port and polished, with the intake being ported 1/4" open

Suspension:
4+ Durablue Axle
2+ A-Arms
2+ 250R shocks
14/36 Gearing
New tires with not much tread left.

Body:
Front Mairer Racing Fender
Rear Mairer Racing Fender
DG Bumper
DG Grab Bar
Dominater Handlebars

Overall on this quad, after the stroker was installed there is less than a few hours. I would also take in the mid 3g's on cash, but mainly looking for a streetbike. Im located in Oregon, and won't ship. I can get some pics up later, if you want some drop me a email at harriso@molalla.net or leave a message here.

[HondaMan222]

hey where are you at in oregon? and can i see a pic? what year is it?

thanks

[oriclez]

Its a 94, with basiclly all brand new parts, new piston, new stroked crank. Im located in Northwestern Oregon(up in mulino, by Oregon City and Salem). As for pics im getting them right now. The only problem with them is I don't have the front fender on yet(I need to remove the handlebars, and I removed it to readjust the valves like in every break in). This isn't fully broken in yet for the most part. I just changed the oil .

[oriclez]

FRONT FENDER NOT INCLUDED IN PIC, WILL GET PICS WITH FRONT FENDER


http://www.hunt101.com/img/182809.jpg


http://www.hunt101.com/img/182810.jpg


http://www.hunt101.com/img/182812.jpg

PS, I will be replacing the starter before I trade or sale this. The starters do not work good with high compression, so I will move to a heavy duty starter. As for pics, I will do my best to put the new front fender on within a couple days and take new pics. If anyone wants any specific pictures just leave a message here or PM me. I will be getting more pics up later. This quad does not get much traction due to tires, but if it can get traction it will lift. I've got it lifted in 4th without much of a problem at all, so my guess if it grabbed in 5th it would lift the front end.

get a picture from the front if you can, thanx

[oriclez]

http://www.hunt101.com/img/182816.jpg


Had to edit the picture a litle and cut out a little of the tire, due to it being larger than 700kb and hunt101 will only hold up to 700kb. Im going to leave this up here for a week or so, and if there are no offers I like I will end up keeping it.

[oriclez]

up