WANTED yfz 450 mx ready(must be longtravel)will consider crf 450 or yzf426

[quadboy1988]

looking for a yfz450 with everything possible under 8k...it has to be longtravel...and within my area ( 2hours)...will consider crf450 or yzf426

[Bill Fuller]

Good luck:eek2:

[416exmx]

i have an 02 CRF450 quad i'd part with.. Axis front/rear, Fischer +3 a-arms, Fischer swingarm, LSR chrome stem, oversized radiator, beadlock rears w/Holeshots, Billet center fronts w/ Kendas, LSR axle bearing carrier and anti-fade, pro-pegs, TC exhaust, and the list goes on... it has a 04 cylinder and piston.........$6,900

or if you are serious i have a

NEW 04 Arens framed CRF450, LT elka, houser, walsh, herrmann, tag, LSR, baldwin, fullbore, all aftermarket.. it is PERFECT........$10,000

NEW 04 LSR framed CRF450, LT elka, Roll loboII, LSR swinger and stem, fullbore, magura, hardkor, and MORE, all aftermarket.......$11,000

[quadboy1988]

got any pics of the 02 crf...im interested

[416exmx]

here

[416exmx]

picture shows stock fronts but i have Billett center fronts w/ new kenda mx's that go on it....

[quadboy1988]

Bottom dollar???

[yfz450_A]

this is what i got but not for 8g's

Walsh long travel front A-arms ( black powdercoat)
Walsh round housing swing arm (black powdercoat)
Walsh steering stem (black powdercoat)
Walsh stem clamp set (with pro design kill switch mount)

Elka quad rate front shocks
Elka dual rate rear long travel shock
Elka rear long travel linkage kit

AC full chassis skid plate
AC rear grab bar (with # plate and fender brackets)
AC front bumper

Graydon proline nerf bars

LSR rear brake block off plate
LSR axle

RPM axle carrier
RPM brake mount kit

Douglas shamrock fronts 4+1 beadlocks
Douglas shamrock rear beadlocks

Streamline steel braded brake lines front & rear
Gibson rebuildable steering damper
Kenda Klaw front tires
Kenda Klaw rear tires
Pro design kill switch
LRD PRO 4 exhaust (chrome)
JE high comp. piston
Zipty fuel mix screw
Tag T-2 bars (CR high bend)
PEP chain roller relocator
GYTR two stage air filter (2)
Billet (red) crank case breather filter and relocator kit
YZ kill switch for start button

This quad runs great only raced 2 local races with all parts on it. It was built next to r250trx bike. Must sell $11,000 obo any questions my e-mail is quadrider22002@yahoo.com or call (217)825-8558 thank you. Shawn

[416exmx]

Originally posted by quadboy1988
Bottom dollar???

that is bottom dollar.. the rear shock felt weak so i sent it off to Santo for a rebuild, it also now has a NEW oversized radiator, candy apple red subframe, and While maier plastic with graphics and seat cover...

[smith]

I have a complete chassis for a CRF450, just add motor electronics and carb and you're off! See below for description.

thanks.


2004 CRF ATV Chassis

Arens frame (400ex geometry)
Stock EX sub-frame
Arens +2” long-travel a-arms
Arens +30mm (1.25inch) swingarm
Arens +1” steering stem
Arens Pro-flex handle bars
Arens extra-capacity radiator
Arens nerf-bars
EX front brakes, hubs and spindles
Steel braided brake lines (front and rear)
X-factor front bumper
Moose full body skid plate
American Dream waterpump cover
FMF powerbomb head-pipe with ti-4 silencer
EX gastank
Maier silver ex plastic
EX seat with Guts gripper seat cover
EX thumb throttle and front brake master cylinder
RPM dominator axle (250r)
Lonestar dual row carrier (250r)
Lonestar anti-fade brake rotor hub (with 250r brake rotor)
Willwood opposing piston rear brake with EX master cylinder and pedal
YFZ aibox, intake and filter assembly
Elka dual rate rear shock, comp and rebound adjustable.
EX rear linkage
Kickstart exender with kickstarter (YZ250 kicker)
Radiator hoses and carb-to-head intake boot
Acerbis flag handguards and mounts
Pro-grip dual compound gel grips


-Less than 5 hours of use-
Price: $5000

With Long-travel Elka front shocks: $5700

Email: smitee@chartermi.net

[Dave400ex]

Smith why are you selling the Arens setup?

[smith]

dave400ex....definatly not because I want to! Divorce is the main reason. :( I get to keep the motorcycle at least, so I'll be able to reassemble one after it's all over hopefully. This is the nicest and best handling one that I've built to date.

[Jeff Marcucci]

I have a new never ridden CRF 450 Race Quad. I can't list everything for it it would take a long time. 03 Lsr Baja frame,custom axis long travel, carbon rims,full bore,no-link rear,LSR axle,hubs swingarm,steering stem and the list goes on. Sweet quad. Have all records. Over 25,000 invested. Selling for $19,000