pro design tether

[red03400]

how would you hook up the pro design kill switch/teather?? thanks

[nky400]

one wire to positive coil wire (i think it is the one with the yellow stripe), other to a ground.

[TC426EX]

Yup...

[red03400]

were would the one w/ the yellow stripe be....

[red03400]

i slit the wire pouch that comes out of the controll box(kill switch start button lights) and i saw blue,green yellow, red yellow black black/whit and brown but nothing w/ a yellow stripe

[hessianmx111]

Originally posted by red03400
i slit the wire pouch that comes out of the controll box(kill switch start button lights) and i saw blue,green yellow, red yellow black black/whit and brown but nothing w/ a yellow stripe
i connected mine to the yellow and black wire coming out of the cdi and ground the ground to the left fender mount,

[red03400]

Originally posted by hessianmx111
i connected mine to the yellow and black wire coming out of the cdi and ground the ground to the left fender mount, did you splice it and just conect the tw wires????

[nky400]

yes... splice into it, make sure everything is clean and that there is good contact. cover it well with electrical tape or high temp rtv/silicone or heat shrinking tape or something else that will protect it from the mud and water and such.

[red03400]

thanks

[400-416EX]

Go to www.off-road.com/atv they give you all the info and pictures