View Full Version : Made some new foot pegs
EXJUMPER
06-16-2004, 01:22 PM
Hope the pics work. What do you think?
http://images.ofoto.com/photos649/1/26/75/27/4/4/404277526103_0_ALB.jpg
EXJUMPER
06-16-2004, 01:24 PM
2
http://images.ofoto.com/photos649/1/26/75/37/2/3/302377526103_0_ALB.jpg
EXJUMPER
06-16-2004, 01:25 PM
http://images.ofoto.com/photos649/1/26/75/27/10/3/310277526103_0_ALB.jpg
EXJUMPER
06-16-2004, 01:26 PM
They are not painted yet, but I think they turned out ok.
EXJUMPER
06-16-2004, 01:27 PM
Might need to open one up in a new window to get them to work.
Woodsrider
06-16-2004, 10:54 PM
Not bad. Whats the material? Is it stainless? How thick?
Slap some PC on them and get em mounted up and do some feild testing;)
Look good:) Powdercoating might be better than painting;)
How are they going to be mounted? The mounting plate doesn't look big enough in the pics.:confused:
EXJUMPER
06-17-2004, 08:50 AM
They bolt in the factory holes and the top of the peg sits about 1/8" lower than stock. As far as material goes, the mounting plate is 1/4" steel and the pegs are 1/8" flat stock.
400ex28
06-17-2004, 10:06 AM
good job looks cool
EXJUMPER
06-17-2004, 11:17 AM
Thanks for the replys guys!:macho
sickmojave
06-17-2004, 11:24 AM
is it just me that can't see the pictures??:confused:
JRDrider22
06-17-2004, 11:25 AM
i cant see them either
member
06-17-2004, 11:29 AM
i cant see them either:(
member
06-17-2004, 11:36 AM
ok nvm i got it to work, i just right clicked the red x went to properties then copy the url and pasted it into the address box or w/e and after that it just worked, btw lookin good mani like the way they look right now, why change them?
EXJUMPER
06-17-2004, 12:30 PM
I don't plan to change them. I'm just going to powder coat them so they don't rust.;)
sickmojave
06-17-2004, 01:40 PM
Originally posted by member
ok nvm i got it to work, i just right clicked the red x went to properties then copy the url and pasted it into the address box or w/e and after that it just worked, btw lookin good mani like the way they look right now, why change them?
that worked for me to thanks.
NICE footpegs :eek2:
Cody_300ex
06-17-2004, 07:57 PM
Nice pegs man!!! those are awesome lookin! I would PC them tho.
JDiablo
06-17-2004, 08:27 PM
only the first pic worked for me,but from what i see,they dun look to shabby....two thumbs up:cool:
toby400ex
06-18-2004, 03:30 PM
How much would ya build me some for?:p
EXJUMPER
06-21-2004, 10:23 AM
You have PM.:cool:
tore up
06-22-2004, 08:11 AM
how much for a set?
member
06-24-2004, 01:07 PM
how did you cut them out?
exrider360
06-24-2004, 08:46 PM
nice job how long did it take
EXJUMPER
06-25-2004, 09:52 AM
Originally posted by member
how did you cut them out?
Sat down with some graph paper and drew them actuall size. Then took all the measurements and transfered it to a 1/8 piece of hardboard. I drilled 3/64" holes in the hardboard where the holes would be drilled so when I laid the hardboard down on the steel plate I could trace the design and put little dots where all the holes had to be drilled. I tacked the three plates together and drilled them all out at once, then I used a cut off wheel to cut out the plates. Did the same thing with the brackets. If you want to see the template I made let me know and I will take a pic of it and post it on here.
EXJUMPER
06-25-2004, 09:56 AM
Originally posted by exrider360
nice job how long did it take
I have about four hours in them.
300exPat
06-25-2004, 01:10 PM
id like to see those templates you used if you don't mind
If you want to see the template I made let me know and I will take a pic of it and post it on here.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.