Question About Jetting for K&N Filter

[04'400ex'er]

I am getting a oversize K&N. First off, What size are the stock mains and piolet and will i need to rejet my main only or my piolet too? And what about the clip on the needle?

[04'400ex'er]

.

[zephead400ex]

Stock:
Pilot: 38
Main: 148

Leave the clip alone, it should be fine. I would go up on the main to a 152. Pilot maybe a 40-42.

[zephead400ex]

Hold up, I just saw you are running w/ a Dyno Jet kit. The jet sizes I recommend were for the stock Keihin jets.

I am not sure with the Dyno jets. I will let someone else fill you in on that.

later

[UglyMotha™]

Originally posted by zephead400ex


I am not sure with the Dyno jets. I will let someone else fill you in on that.

later



read the directions that came with the jet kit :o

[zephead400ex]

Originally posted by UglyMotha™
read the directions that came with the jet kit :o

D'OH:D

[04'400ex'er]

Originally posted by UglyMotha™
read the directions that came with the jet kit :o Well, while i was gone, I found out the power kit I ordered was back-ordered. So, I bought everything but the jet kit individually.I will buy ndividual kehin jets. I just havent updated my sig.

[04'400ex'er]

.