Will ATC250R Rear suspesion fit a TRX Frame?

[96FMF300EX]

I was thinking about building up a 250R quad and wanted to know if the swing arm adn rear shock and that kinda stuff fit a 250R Quad Frame. Thanks

[Pvt. Maggot]

it might fit..and it might work..i've never herd of it....then again it might fit but the angles are off and it might cause premature chain wear or other things...i'm not sure though..do a search on it.

[deathman53]

the 86 rear end is the same as the trx, won't work on 88/89, the dog bone is different on the 88/89 and the 88/89 had the motor mounts on the frame(not swinger) there is other differences, should work on a 86 or 87 frame , you have to watch out the I think the rear shocks won't work as the top bolt is a different thickness and the pivot is wider.

[madmac]

yep he is exacty right, and the rear shock line to the rezzy is alot shorter on an atc. also if your using an 85 atc the carrier is different than an r. it will work if you use the atc swing arm, carrier, and axle. The axles may actually be the same but I know that the carriers and swingers are different.

[deathman53]

the 85r axles are a bit different too. that is why durablue makes a 85 and a 86+ axle. the axle will work, but your gonna replace swingarm beraing farily quickly.