quadmxracer
06-07-2004, 02:43 PM
Ok I have a question for you guys. Heres the deal I have 16" Dual Rate Elka Rear (Complete Adjustible). I recently put on a houser +1.25" swinger and have noticed a little problem with how the shock works. I havn't adjusted anything because that way you have something to base from. For example I will extend the shock all the way up by pulling on the grab bar and let it sag out on its own. Then it seems like it catches a little and I have to press down more on the shock to get to go down the rest of the way (probably about 1/4-1/2" at most). After that I took a look at the bottom spring and it appears that it is binding just a little bit not bad. But I was wondering what you guys might think about this and what I could do to remedy this for now untill I have it valved for that swinger. Such as tighting down the spring would that help? Thanks in advance for all help.
-Quadmxracer (Clayton)
-Quadmxracer (Clayton)