adjusting works front shocks

[Atvman8351]

i have triple rates with rezzis for the front and was wondering how you adjust them with the cup up top

[Jingle #11]

well its alot easier if u undo the bolt on the bottom a-arm and take the shock off and leave it held on by the top bolt. Then just push down on the cap and there is a clip move it up or down to were ever you want it and release the cup. thats bout it. this is how i do my tcs im sure the works are the same way.

[stonerider250x]

if you are talking about the cup at the top of the shock you have to first put the front end of your quad on jacks the u have to compress the springs so that the cup will move down past where the c-ring and grooves are. this is really hard with out a spring compressor took two pll to push mine down. then move the clip down to make the shock stiffer or up to make it softer