PDA

View Full Version : How to adjust...



Lorduss
03-22-2002, 05:03 PM
The throttle, i have excess play i want to take care of, how exactly do i do it ?

MadcapEX
03-22-2002, 05:49 PM
Take the top plate off the throttle.Open wide open,take needle nose pliers and CAREFULLY pull the exposed cable until you hear the slide bottom out in the carb(clunk or click).How far you have to pull it is the amount of slack,pull the boot back on the cable and turn it out until the slack is gone.Leave just enuf slack that the throttle hits the stop and the slide bottoms at the same time without stretching the cable. It sound hard but its simple takes about 5 minutes.

Lorduss
03-22-2002, 07:51 PM
it was easy, just is i didnt realise for a few min about exactly where the ajustment was, thanks.