Magura Hydro clutch help

[steveatv3]

Does anyone have a hydro clutch for there 400ex that could get me pics of how it is suppose to mount to the clutch arm that sticks out of the side cover

Thanks
steve

[pnut420]

I can get you some pics tomarrow, basically it mounts like the stock one.

I just hold the arm as tight as I can, then put the magura end in the slot, then pull the magura out as much as you need to so the holes line up.

[steveatv3]

it doesnt seem to go far enough, and i broke the Fin peice that connect into the engine bracket, talk about cheap or me being dumb

[steveatv3]

steveatv3@netzero.net for the pics

[stupid driver]

you'll also want to be careful with the bolt/nut tension adjuster where the engine/clutch mount is. It will break quite easily, so dont crank it too tight ;)

[steveatv3]

LOL thanks stupiddriver........to late, but i was able to reuse it, and i manufactured my own mount and it works fine

Thanks guyz