Adjusting rear brake lever?

[400exBro]

I just put on my x-factor pro pegs and found that the rear brake pedal is to high and some times find the edge of my foot underneath of the pedal which is kind of scary when going over jumps... I was wondering if there was a way to lower it so my foot won t slide under neath the pedal???

thanks
BTW - x-factor pro pegs are extermly soild, and strong good stuff worth the money!!!!

yes you can lower & raie the pedal...there should be a screw on the end of the pedal where it goes up into the master cylinder...you turn that one way oor the other to raie & lower it...good luck

[400exBro]

thanks...

[the Z Man]

Yes, I had to adjust mine but you will have to file the bump off the bottom of the lever because when your brakes heat up then the nub will hit the peg mount and your brakes will not work properly,,,,,,,

[400exBro]

Originally posted by the Z Man
Yes, I had to adjust mine but you will have to file the bump off the bottom of the lever because when your brakes heat up then the nub will hit the peg mount and your brakes will not work properly,,,,,,,


where is this so called nub???