installing tether kill

[PEPwalshZ440]

hey everyone,
My first race on my R is monday the 31st. I need to install my kill switch by then in order to race. Could neone IM me online to tell me how to do this step by step? the kill switch comes in on friday. My SN is "TC450rJRD".
any help appreciated,
Mike

[PEPwalshZ440]

HELP PLEASE:confused:

[brif]

Try a search or
http://www.exriders.com/vbb/showthread.php?s=&threadid=93360&highlight=tether

[PEPwalshZ440]

thanks! helped

Done

[timscherer]

For anyone interested, I found out from Mark Baldwin how to properly wire a kill switch to the 450R. Follow instructions listed below:

1) Trace the wires form the stop switch (mounted on handle bars) to the white connector mounted to the left hand side of frame.

Note: The wires from the stop switch splits off (2) directions, (1) set to the head light assembly, and the other to the (white plastic connector).

2) Look for the black wire with the white tracer.

3) Splice, connect, or solder (1) wire from the kill switch to the black wire (w/ the white tracer) on the stop switch side of the connector.

4) Then ground the other wire from the kill switch to the frame.

That's all, your finished.

Hope this helps, any questions just send a reply to this post.

Tim

[PEPwalshZ440]

dealer told me to ground it to the one with the yellow tracer

[SHOCKER]

on my Z what i had to do is connect the long wire from the pro desgin kill switch to the pulse wire that connects to the coil, and then just ground the short wire

[PEPwalshZ440]

tim u sure thats right?
Mike

[PEPwalshZ440]

nvm, i just did it and it works