urgent help please

[garett]

i just got my carrier to install the grease thingy is in the middle if carrier how do you grease it? there is no hole on thje swingarm 03 400ex help please

[cdalejef]

You have to pull it out to grease it.

[garett]

how often i have to do this?

[Doibugu2]

Originally posted by Jeff@QuadShop
You have to pull it out to grease it.

U understood him?

[cdalejef]

Originally posted by garett
how often i have to do this? I'd do it every couple months.

[garett]

i understand now and tyvm i thought that is the way thx for the help

[TC426EX]

if you want to be creative you can drill a 3/4" hole or so in the rear of the swingarm and put a short bolt or drain plug in it after you thread it. Then you can simply take out the bolt, rotate the carrier inside the swingarm until the zerk is exposed and you can grease it up wtih your grease gun that way. Ive seen this done before, and there is an article on it on a project 400ex on paatving.com if you want to check it out. I dont know how comfortable you are drilling your swingarm, that part should be ok, but figured I would pass this along if you want to do it.

-Paul
-TC426EX with everything
check it out on douggust.com