might get a raptor

[sam the brave]

i have wanted a fast bike and i found a great deal only for me its
o4 raptor with mods
fat boy 4 pipe
k&n fliters
polished pistons
+1+3 inch a arms
red maire plastics and
black skin graphics
tag bars

[Punk'd]

Well from what i hear they are pronounced CRAPTOR..









BUT with some mods they can be NICE id say go for it man unless you have money for something else you like..

[sam the brave]

well i have rode it before and it is fast and very easy to turnbut he will only sell it at the end of the summer so i will prob get the money by then

[LTandRaptorider]

Originally posted by Punk'd
Well from what i hear they are pronounced CRAPTOR..









BUT with some mods they can be NICE id say go for it man unless you have money for something else you like..

Well... you heard wrong! Quit listening to jumbo and his buddy dirtyboy or whatever his name is.;)

[sam the brave]

the best part is the price ...














4500:D

[TORO1968]

My brother is quite happy with his Raptor, as am I... I know people call them junk, but my bro hasn't had a problem with his.

They respond very well to mods and are a blast to ride...not even comparable to the 400ex, 450r, YFZ, etc. because it feels so different. If you are looking for a nice trail/dunes quad but aren't wanting to race it too much, the Raptor is a good choice. :)

-Jordan

[Andrew400ex]

You can by my cannondale for less and it would smoke that thing...and why did he extend the a-arm but keep the stock axle? The front is already wider than the rear stock,it must feel sooo wierd.

[sam the brave]

he was gonna pu an axel on but he is saving for the yfz cuz ther was no yfz when he got the bike

[sam the brave]

Andrew400ex

do u wappen to know the cannondale website every time i try i get pedal bikes

[MOFO]

whats a polished piston?? :confused:

stay away from the craptor...find a nicer YFZ...the craptor is nothing but trouble

[JDiablo]

Originally posted by MOFO
whats a polished piston?? :confused:

im with him:confused:

[RMX500]

a wider lower raptor with better carburation is probably the best open class machine their is.

otherwise.. if you want open class go for a Predator.

450 class? YFZ 450 is probably your best bet.

[sam the brave]

its some type of after market piston

[xr50layke]

iv always liked raptors, yes, thats a good deal. id take a raptor with those mods over a stock 400ex. im heavier, thats why.

id take a craptor if I had the money for every little thing that breaks on them :rolleyes:

[Thumperz4Life]

I personally really enjoy riding the raptor. I think it is a great bike, great power, great feel, and looks good to. Stick the bike is fun, but I would defiantely add a longer swingarm for the one your looking into. I do 99% of my riding in the dunes and the Raptor is a great bike for the dunes .

[brian-250]

neighbors raptor- white bros R-4, rejjeted, drilled lid, uni filter,lowing kit to go 2 in shorter,holeshot rears, itp offset fronts



i kinda like it its a HUGE step up from my dads warrior in speed and power itfeels really weird in the woods i like it for wide open and MX riding,not woods,but id say go for it,i got a couple a friends with raptors that are a wiz with them so anything you wanna know just ask:cool:

[RMX500]

the 2 downfalls of a raptor are

1. lower bottom end than most open class

2. pi$$ poor stock suspension

Swap out those shocks, pop in better carbs, pipe it and jack that swingarm out a bit and then add a tooth or 2 and I promise you'll have a Raptor capable of about 90mph with enough bottom end to still accelerate quickly and climb.

a stock raptor can be geared to do 90mph but it robs the bottom end too much. modded you can expect to gear it to 90mph and have a close to stock bottom end.

[JDiablo]

Originally posted by RMX500
a stock raptor can be geared to do 90mph but it robs the bottom end too much. modded you can expect to gear it to 90mph and have a close to stock bottom end.

[brian-250]

Originally posted by 300exrida



im wit stupid:macho

[RMX500]

hey i'm not kiddin'

but like i said it leaves you with NO bottom end whatsoever.

[brian-250]

Originally posted by RMX500
hey i'm not kiddin'

but like i said it leaves you with NO bottom end whatsoever.

ok,w/e you say:rolleyes:







:devil:

Raptors are easily capable of speeds up to 95 mph.....they are great bikes just need some stuff to make them tear apart the competion....oh and the stock suspension isn't that bad rmx500.....it can take jumps 10 feet up on a little down slope....

Originally posted by RMX500
the 2 downfalls of a raptor are

1. lower bottom end than most open class

2. pi$$ poor stock suspension

Swap out those shocks, pop in better carbs, pipe it and jack that swingarm out a bit and then add a tooth or 2 and I promise you'll have a Raptor capable of about 90mph with enough bottom end to still accelerate quickly and climb.

a stock raptor can be geared to do 90mph but it robs the bottom end too much. modded you can expect to gear it to 90mph and have a close to stock bottom end.


man oh man, you REALLY need to read my signature.....

[Bretmd94]

i wouldnt do it. Theres a reason he's selling it. I had one. You would be more happy with finding a modded z400.

[sam the brave]

trust me there is nothig rong with the bike i have rode it alot he selling it cheap cuz this kid is rich

[dirtyboy88]

well if u like it get it , dont listen to stupid people like me and jumbo, i think thats a good price for a 660 , but i dont know Yamaha

[chucked]

50 bucks says he dont ever buy anything!

[toby400ex]

I dunno what all you guys are talking about, Raptors kick *** :blah:

[Kennethyfz450]

everything seems fine besides the price i like raptors just not as much as my 400ex or yfz.

i think the price is to high because you can get one for 5,400 brand new maybe take OFF a couple hundred..


abernathysonline.com