View Full Version : parting out 250x\350x
djmac
05-10-2004, 09:01 PM
Getting a new quad! this was a crate motor installed last august and has about 40 hours on it. parting out entire quad including the powroll exhaust and motor mounts swing arm ....... email - dmcneil03@comcast.net
rap169
05-10-2004, 09:43 PM
where are u located? How much for the motor and exhaust?
300XFST4602
05-11-2004, 07:04 AM
Extended swing arm??
dirtmomma
05-11-2004, 08:35 AM
Originally posted by djmac
Getting a new quad! this was a crate motor installed last august and has about 40 hours on it. parting out entire quad including the powroll exhaust and motor mounts swing arm ....... email - dmcneil03@comcast.net
Are the rear hubs off of a 250x?? Are they the same as the 300?? If so how much for the rear hubs if they are in decent shape??
djmac
05-11-2004, 09:43 AM
750 for motor 200 for exhaust near flint mi.
djmac
05-11-2004, 09:45 AM
stock swingarm with new bearings and seals
djmac
05-11-2004, 09:48 AM
hubs and axle are fine but i am not sure if they will fit a 300 ex. most parts are interchangeable but check it out. make an offer if you are interested.
ripinryan
05-11-2004, 10:25 AM
how much for the hole thing
djmac
05-11-2004, 12:09 PM
Its already in parts.
djmac
05-11-2004, 08:03 PM
bump
dirtmomma
05-12-2004, 08:14 AM
I'll give y a $40 for the rear hubs :) LMK
What parts are gone from it being a roller? And how much you asking for what you have left?
djmac
05-12-2004, 06:50 PM
just took it apart. the swing arm with the axle rotor and brake still on. a arms are off as well as the steering stem. all the parts are still here. frame has fresh paint in red.
dirtmomma
05-13-2004, 09:42 AM
Hey od you have the 350x air boot??? I'd buy that & the hubs $65 shipped :) BTW what year are the hubs off of??
Thanks again
ripinryan
05-13-2004, 11:11 AM
how much for the 350x motor carb and all electrics can i see a pic
djmac
05-13-2004, 11:45 AM
the airboot is a 250x modified to work on the conversion. work good looks good. 75 dollar shipped for the 3 items. please pm your address if you are interested. you can use paypal thru my email if you like.
Varmit57
05-13-2004, 05:15 PM
I'm needing a tank. Do you still have one and what do you need for it Shipped to 50208?
Thanks
djmac
05-13-2004, 10:02 PM
75.00 shipped
CowsBitePeople
05-14-2004, 08:15 AM
how much for carb and carrier with bearings shipped to 07843 if u have the carrier, thanks
Matt....
r-exrider0003
05-15-2004, 11:50 AM
Hey....do you have a grab bar, if so how much shipped....and do u have a aftermarket swing arm skid plate...if so how much for it shipped????????thanks
djmac
05-15-2004, 02:59 PM
32.00 shipped has a tail light holder as well. sorry no skidplate.
thanks
djmac
05-17-2004, 10:39 PM
sold........ rear fender, seat, shocks, nerf bars, front tires and rims, anyone need a powroll exhaust, hubs barely used chain and sprocket set.......
Tom Lynn
05-18-2004, 10:40 AM
Hey DJ whats goin on I doubt you remember me.. you was looking at mine in ohio. The 250x/350x well I'm in need of a kicker I never bought one. Give me the price and I'll give you the money [/B]
djmac
05-18-2004, 03:53 PM
sure i remember. how are you? we just got a 250r so we are parting out the X to help pay for it. i have the motor on ebay and the pic shows the kickstarter so it would not be fair to remove it. if i cannot get what i want on ebay this time around i will pm you.
djmac
05-19-2004, 06:40 PM
bump
djmac
05-20-2004, 12:07 PM
bump
djmac
05-24-2004, 09:55 PM
tom,
sorry the motor and exhaust just sold on ebay and the kickstarter went with it.
Tom Lynn
05-25-2004, 02:50 PM
I dont mean to be nibby but what did u get out of that engine?
djmac
05-25-2004, 07:22 PM
700.00 + shipping
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.