Help

[fastexgirl4c]

ok..my 300 is boggin out when i rev it in gear....1/4 throttle and it will die out.it wont stall...it will just bogg out in hign rpms...i checked everything...the cam, the valve..timing...everything...i put all new electrics...regulator...cdi...reverse idicator...coil...solenoid...basically everything...does any one knw wats up wit it...???..

[theTman]

and you thot my last quad was a POS:rolleyes:

[chucked]

You did all that crap to it without even cleaning the carb out?????

[hondafox440]

Originally posted by chucked
You did all that crap to it without even cleaning the carb out?????

LMAO I was just going to say that. Clean that out and rejet it..

[fastexgirl4c]

we cleaned the carb out...and rejetted it...it still does the same thing...ill clean and rejett it again...just to see

[rockwilda1089]

for someone w/ such an expensive quad, u seem to have a lot of problems

[hondafox440]

Originally posted by fastexgirl4c
we cleaned the carb out...and rejetted it...it still does the same thing...ill clean and rejett it again...just to see

Then your jetting is off. Try throwing a leaner pilot in, and setting the fuel screw to like 2 turns out.

[fastexgirl4c]

we put a 38 in ..thats the smallest pilot.im usin a 400ex carb beacuse elbrock is fixin my other carb right now ...but we are puttin in a new stator ..to see if that might be it...even thou the stator is new along wit the pulse generator

[fastexgirl4c]

ok....we found out wat was wrong...the reverse inhibitor and the neutral saftey switch were messed up...but we fixed them..and the quad runs great now...the smallest things can surpass the mind sometimes...