PDA

View Full Version : tools


03-18-2002, 08:19 PM
Does anyone know where I can get a complete list of needed tools (socket/wrench sizes) etc?
RideRed400EX
03-19-2002, 10:05 AM
The factory manual provides a tool list for each chapter but they don't get as specific as size.
Adam496
03-19-2002, 12:53 PM
just buy a regular tool kit like a 100 piece also get a touqe wrench and for the engin get a piston ring puller/instaler
Deathbringer
03-19-2002, 01:46 PM
BTW make sure its metric not standard....
I got a kit with everything from 6mm-25mm and seems to cover just about everything on the bike so far.
Quadfather
03-19-2002, 04:02 PM
Get a 6mm allen socket for adjusting the chain.

Most used sockets/wrenches are 8,10,12,14mm, plus a 17mm socket for the wheel lugs.

You will also need a hammer, to bust stuff up when things don't go right.
crouse267
03-19-2002, 05:57 PM
duck tape, bailin wire, jb weld, bfh (aka hammer) and pliers is all u need:D
just kidding all you reall need is a set of sockets 6-19 and a 22(i think fore the hub bolts?) a set of wrenches 8-19, a few GOOD screwdrivers (good so you dont strip out screws) torq wrench, and some other things that i may have forgot. oh ya and a 6 mm allen socket is really healpful for tightning the chain and i have found the easest way to change the spark plug is to use the tool out of the factory tool kit.
SJG400EX
03-19-2002, 06:15 PM
Sears
VegasEx'r
03-19-2002, 11:58 PM
Originally posted by Quadfather
You will also need a hammer, to bust stuff up when things don't go right.

You only need the hammer for doing precision work, like if you want custom lobes on your cam :devil
ChadEXer
03-20-2002, 08:42 AM
What are you going to do?? Do like me and tear it completely down. When we put it back together the one with the most pieces left over wins:D