exrider2002
04-30-2004, 09:11 PM
i have been riding in a lot of mud and water and my electric start will no longer work. It was working fine until about 2 hours of riding in mud sand water etc. If u take a screw driver and touch both screws on the top of the cilenod it will fire right up. But i'm not getting any power to the key switch. If i put it in neutral the neutral light will not come on until the quad is started. I checked all the connections and they are all connected and seem to be dry.
so what might the problem be , loose wire, wet, fuse, etc,
any suggestions thanks.
so what might the problem be , loose wire, wet, fuse, etc,
any suggestions thanks.