sparks x6 problems

[dougb77]

Does anyone on here have a problem with the clutch cable rubbing on the header of the x6 exhaust system. I called Sparks and they told me to adjust the cable to be longer so it'll clear the header, but it still doesn't. I dunno how to fix the prob.

[cals400ex]

you just need to bend the black clutch cable guide down by the engine.and you will be fine.

[dougb77]

i did bend it and it still rubs. do you have any pics of it on your bike?

[cals400ex]

no actually i don't. i know i bent mine a decent amount and it sits probably 3/4 to 1 inch away and i havn't had a problem for over a 1/2 year.

[dougb77]

did you bend the thing on the cover that has the two bolts in it that holds the cable itself?

[cals400ex]

no, the only thing i bent was the black cable guide.

[R3Concepts]

Loosen the guide and turn it instead of bending it.

[muff]

route it under the headers and up to the left of the steering stem. I clipped mine into the white piece of plastic thats under the gas tank and also zip tied it to that tab

heat tape is nice to have as well

[Giz400ex]

Originally posted by muff
route it under the headers and up to the left of the steering stem. I clipped mine into the white piece of plastic thats under the gas tank and also zip tied it to that tab

heat tape is nice to have as well Your quad is way to clean:eek2: :eek2: :D

[muff]

Originally posted by Giz400ex
Your quad is way to clean:eek2: :eek2: :D


yea i had it apart for a while because i was waiting for my frame and parts to come back from being powdercoated so i was able to clean everything pretty good :cool: