PDA

View Full Version : 13 T front


R3Concepts
04-26-2004, 03:27 PM
Anyone know if a company makes a 13 tooth front sprocket for a 400ex? If so where can I get one?
ReconRider25
04-26-2004, 03:33 PM
why would you want a 13t? thats way too short....
R3Concepts
04-26-2004, 03:35 PM
Its for arenacross and thanks for looking.
ReconRider25
04-26-2004, 03:43 PM
i dont think theres any for the 400ex but maybe one from an xr400 or other xr's will fit?:confused:
sniffthis400
04-26-2004, 03:47 PM
holy short.........:confused:
R3Concepts
04-26-2004, 03:50 PM
Arenacross is all about acceleration, the shorter the better. with a 14 I cant pull 3rd hard through the tight corners and with a 13T I should be able to.
hondafreestyler
04-26-2004, 08:21 PM
Call sidewinder racing ...

I dont know man ... with a 13T your front end is going to be up up and away ...

I left you a pm
R3Concepts
04-26-2004, 08:36 PM
hondafreestyler.. do you have aol or something so I can expalin the front end alignment to you?
sparks400
04-26-2004, 08:43 PM
u could go up in the back
R3Concepts
04-26-2004, 08:47 PM
I know im tryin to find somewhere that sells 40 tooth rears right now.
wheeltrax
04-26-2004, 09:12 PM
does a 250x/300ex front sprocket fit on the 400ex? they come stock with 13 front
Silverfox@C&DRacing
04-27-2004, 08:44 AM
I would go up in the rear, we carry a 40 tooth rear sprocket


the front on a 300ex is different than the 400ex
R3Concepts
04-27-2004, 08:50 AM
Silver.. is it steel or aluminum? And how much do they run?
Silverfox@C&DRacing
04-27-2004, 08:57 AM
it is a good steel sprocket I have been running my for a year now
they are $22.50
hondafreestyler
04-27-2004, 04:29 PM
R3 concepts no I dont have aol ...

if you could pm me ... or email me

hondafreestyler@hotmail.com

Down one tooth on the front is equal to up 3 in the rear ...

Since stock is 15 on a 400ex ... dropping to a 13 would be like adding 6 to the rear sprocket .... adding 5 would be appox. 71% of the change it would be as dropping 13 ... and on and on