13 T front

[R3Concepts]

Anyone know if a company makes a 13 tooth front sprocket for a 400ex? If so where can I get one?

[ReconRider25]

why would you want a 13t? thats way too short....

[R3Concepts]

Its for arenacross and thanks for looking.

[ReconRider25]

i dont think theres any for the 400ex but maybe one from an xr400 or other xr's will fit?:confused:

[sniffthis400]

holy short.........:confused:

[R3Concepts]

Arenacross is all about acceleration, the shorter the better. with a 14 I cant pull 3rd hard through the tight corners and with a 13T I should be able to.

[hondafreestyler]

Call sidewinder racing ...

I dont know man ... with a 13T your front end is going to be up up and away ...

I left you a pm

[R3Concepts]

hondafreestyler.. do you have aol or something so I can expalin the front end alignment to you?

[sparks400]

u could go up in the back

[R3Concepts]

I know im tryin to find somewhere that sells 40 tooth rears right now.

[wheeltrax]

does a 250x/300ex front sprocket fit on the 400ex? they come stock with 13 front

[Silverfox@C&DRacing]

I would go up in the rear, we carry a 40 tooth rear sprocket


the front on a 300ex is different than the 400ex

[R3Concepts]

Silver.. is it steel or aluminum? And how much do they run?

[Silverfox@C&DRacing]

it is a good steel sprocket I have been running my for a year now
they are $22.50

[hondafreestyler]

R3 concepts no I dont have aol ...

if you could pm me ... or email me

hondafreestyler@hotmail.com

Down one tooth on the front is equal to up 3 in the rear ...

Since stock is 15 on a 400ex ... dropping to a 13 would be like adding 6 to the rear sprocket .... adding 5 would be appox. 71% of the change it would be as dropping 13 ... and on and on