tips and steps about shaving fenders

[user101]

i need the tips and steps about shaving fenders. also what kind of tools do i need. also does any anyone have any pics that will help me with this. thanx for any help:)

[Moto92]

Its easiest to make the line your going to cut with electrical tape. It follows any curves very well. Just use a jig saw with a fine tooth blade to cut the plastic. Then some softer grit sandpaper will take care of any burrs that are left over. It a pretty simple project.

[crashinmatt]

I used the tape to mark it off then i used a dremel. first with a cut-off wheel, then used some kinda grinding/sanding wheel that came in the dremel kit. its really esy to do also.

["BLAHH"300!!]

....a butter kniff and a lighter...heated up the butter knife and it slid through like a hot knife through...,well,..plastic....

hey watch out for the fender supports under there..don't forget about em'...hold on the the fender's if you use a jiggsaw..they want to jump around with the blade..

take your time..you got all day..