Hub & Tierod Question ...

[hondafreestyler]

Has anyone had trouble with the stock 400ex hubs going onto the rpm dominator axle? ... it seems a little tight ... I didn't hit it or anything just pushed a little and it didn't want to go on ... should I maybe grease the splines really well?

Just wanted to know if anyone else had this problem ...

And I am running Burgard +2 a-arms ... do you just use the stock tie-rod ends? ... should I go with aftermarket? ... if so whice ones?

And ... this will sound dumb ... :rolleyes: but .... the stock spindles (steering knuckle) ... are marking L (left) and R (right) ...
Are they marking these looking at the quad head on? ... or are they marking these as your sitting on your quad?

Thanks
-Mike

[R3Concepts]

The hubs should be tight, thats a good thing, if they are loose they will spin on the axle splines. Use the stock tie rod ends on the new +2 tie rods. And the spindle mounts only one way, when you are sitting on the bike, the tie rod mount should be pointing towards you(the back of the bike).

#469 426ex

[cdalejef]

Always put some grease on the splines anyway!

[hondafreestyler]

great ... thanks guys! ...